![ECS Elitegroup NFORCE3-A939 [8/84] Chipset](/img/pdf.png)
ECS Elitegroup NFORCE3-A939 [8/84] Chipset
2
Introducing the Motherboard
• HyperTransport link to the AMD Athlon 64/Athlon 64 FX CPU
• AGP3.0 8X interface at 533 MT/s
• PCI 2.3 interface, supporting up to six PCI slots
• Two separate SATA controllers with integrated PHYs, each supporting two
drives in master mode
• IEEE 802.3 NVIDIA MAC for 100BASE-TX/10BASE-T Fast Ethernet/Ethernet
• Single USB 2.0 EHCI and Dual USB 1.1 OHCI, supporting up to eight ports
• Dual Fast ATA-133 IDE controllers
• AC’97 2.3 interface, supporting S/PDIF pass-through function
Feature
Processor
The nForce®3 250 is a single-chip with proven reliability and performance.
Memory
• 2 x 184-pin, 2.6V, DDR SDRAM DIMM sockets support up to 2 GB
• Support DDR400/333/266 DDR SDRAM with Dual-channel architecture
Audio CODEC
Chipset
HyperTransport
TM
Technology is a point-to-point link between two devices, it enables
integrated circuits to exchange information at much higher speeds than currently avail-
able interconnect technologies.
This motherboard uses a 939-pin socket that carries the following features:
• Accommodates AMD Athlon 64/Athlon 64 FX CPUs
• Supports high-performance HyperTransport CPU interface
• Compliant with the AC’97 v2.3 CODEC
• Supports 6-channel audio CODEC designed for PC multimedia systems
• Provides three analog line-level inputs with 5-bit volume control: Line-in, CD,
AUX
• Supports S/PDIF output function
This motherboard supports UltraDMA bus mastering with transfer rates of 133/100/66
MB/s.
The motherboard comes with the following expansion options:
• One AGP slot
• Five 32-bit PCI slots
• Two IDE headers which support four IDE devices
• One floppy disk drive interface
• Two 7-pin SATA connectors
Expansion Options
Onboard LAN (optional)
• Supports 10/100Mbps auto-negotiation
• Supports half/full duplex operation
• Supports MII/7-wire SNI (Serial Network Interface) interface
• IEEE 802.3/802.3u compliant
The onboard LAN provides the following features:
Содержание
- Copyright 3
- Disclaimer 3
- Federal communications commission fcc 3
- Preface 3
- Trademark recognition 3
- About the manual 4
- Canadian department of communications 4
- Declaration of conformity 4
- Preface 4
- Chapter 1 1 5
- Chapter 2 7 7 7 7 7 5
- Chapter 3 25 25 25 25 25 5
- Preface i 5
- Tttttable of contents able of contents able of contents able of contents able of contents 5
- Chapter 4 47 47 47 45 47 6
- Manual installation 8 utility software reference 8 6
- Using the motherboard software 45 about the software cd rom 5 auto installing under windows 98 me 2000 xp 5 6
- Chapter 1 introducing the motherboard 7
- Introducing the motherboard 7
- Introduction 7
- Audio codec 8
- Chipset 8
- Expansion options 8
- Feature 8
- Introducing the motherboard 8
- Memory 8
- Onboard lan optional 8
- Processor 8
- Bios firmware 9
- Integrated i o 9
- Introducing the motherboard 9
- Introducing the motherboard 11
- Table of motherboard components 11
- Chapter 2 installing the motherboard 13
- Choosing a computer case 13
- Installing the motherboard 13
- Installing the motherboard in a case 13
- Safety precautions 13
- Checking jumper settings 14
- Installing the motherboard 14
- Setting jumpers 14
- Bios_wp 15
- Checking jumper settings 15
- Clr_cmos 15
- Installing the motherboard 15
- Jkbmsv1 15
- Jumper settings 15
- Jusbv1 15
- Jusbv3 1 15
- Connecting case components 16
- Installing the motherboard 16
- Atx12v atx 12v power connector 17
- Atx_power atx 20 pin power connector 17
- Cpu_fan sys_fan pwr_fan fan power connectors 17
- Installing the motherboard 17
- Power 12v 3 17
- Sensor 17
- Connecting pins 1 and 3 to a front panel mounted led provides visual indication that data is being read from or written to the hard drive for the led to function properly an ide drive should be connected to the onboard ide interface the led will also show activity for devices connected to the scsi hard drive activity led connector 18
- Connecting pins 2 and 4 to a single or dual color front panel mounted led provides power on off sleep and message waiting indication 18
- Front panel header 18
- Hard drive activity led 18
- Installing the motherboard 18
- Power sleep message waiting led 18
- Power switch 18
- Reset switch 18
- Supporting the power on off function requires connecting pins 6 and 8 to a momentary contact switch that is normally open the switch should maintain contact for at least 50 ms to signal the power supply to switch on or off the time requirement is due to internal de bounce circuitry after receiving a power on off signal at least two seconds elapses before the power supply recognizes another on off signal 18
- Supporting the reset function requires connecting pin 5 and 7 to a momentary contact switch that is normally open when the switch is closed the board resets and runs post 18
- The front panel header sw1 provides a standard set of switch and led headers commonly found on atx or micro atx cases refer to the table below for information 18
- Before installing the processor 19
- Installing hardware 19
- Installing the motherboard 19
- Installing the processor 19
- Cpu installation procedure 20
- Ddr sdram memory module table 20
- Installing memory modules 20
- Installing the motherboard 20
- Chip selects data bus 21
- Installation procedure 21
- Installing the motherboard 21
- Maximum dram speed 21
- Refer to the following to install the memory modules 21
- Table a unbuffered dimm support for 939 pin 21
- This motherboard supports unbuffered ddr sdram only 2 push the latches on each side of the dimm slot down 3 align the memory module with the slot the dimm slots are keyed with notches and the dimms are keyed with cutouts so that they can only be installed correctly 4 check that the cutouts on the dimm module edge connector match the notches in the dimm slot 5 install the dimm module into the slot and press it firmly down until it seats correctly the slot latches are levered upwards and latch on to the edges of the dimm 6 install any remaining dimm modules 21
- Installing the motherboard 22
- Size vendor model name 22
- Table b ddr memory module qvl qualified vendor list 22
- About ide devices 23
- About ultradma 23
- Installing a hard disk drive cd rom sata hard drive 23
- Installing the motherboard 23
- About sata connectors 24
- Installing serial ata hard drives 24
- Installing the motherboard 24
- Fdd floppy disk connector 25
- Installing a floppy diskette drive 25
- Installing add on cards 25
- Installing the motherboard 25
- Installing the motherboard 26
- Audio1 front panel audio header 27
- Connecting optional devices 27
- Installing the motherboard 27
- Refer to the following for information on connecting the motherboard s optional devices 27
- This header allows the user to install auxiliary front oriented microphone and line out ports for easier access 27
- Cd_in analog audio input header 28
- F_usb1 f_usb2 front panel usb headers 28
- Installing the motherboard 28
- Sata1 sata2 serial ata connectors 28
- Spdifo1 spdif out header 28
- Connecting i o devices 29
- Installing the motherboard 29
- Irda infrared port 29
- About the setup utility 31
- Chapter 3 using bios 31
- Entering the setup utility 31
- The standard configuration 31
- Using bios 31
- Bios navigation keys 32
- Key function 32
- Press del to enter setup pressing the delete key accesses the bios setup utility 32
- The bios navigation keys are listed below 32
- Using bios 32
- Updating the bios 33
- Using bios 33
- Date and time 34
- Ide devices none 34
- Ide hdd auto detection 34
- Standard cmos features 34
- The date and time items show the current date and time on the computer if you are running a windows os these items are automatically updated whenever you make changes to the windows date and time properties utility 34
- This option displays basic information about your system 34
- To display the ide submen 34
- Using bios 34
- While this item is highlighted to prompt the setup utility to automatically detect and configure an ide device on the ide channel 34
- Your computer has two ide channels primary and secondary and each channel can be installed with one or two devices master and slave use these items to configure each device on the ide channel 34
- Using bios 35
- Advanced bios features 36
- Cpu internal cache enabled 36
- Enable this item to shorten the power on testing post and have your system start up faster you might like to enable this item after you are confident that your system hardware is operating smoothly 36
- External cache enabled 36
- Hard disk boot priority press enter 36
- Quick power on self test enabled 36
- This item allows uers to enable or disable the cpu internal cache leave this item at the default value for better performance 36
- This item allows uers to enable or disable the external cache leave this item at the default value for better performance 36
- This option defines advanced information about your system 36
- To view the following screen 36
- Using bios 36
- Using bios 37
- Advanced chipset features 38
- Cas latency tcl 2 this item determines the operation of ddr sdram memory cas column address strobe it is recommended that you leave this item at the default value the 2t setting requires faster memory that secifically supports this mode 38
- Dram configuration press enter 38
- These items define critical timing parameters of the motherboard you should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware if you change the values incorrectly you may introduce fatal errors or recurring instability into your system 38
- Timing mode auto this item allows you to set up the dram timing manually or automatically controlled by the bios memclock index value mhz 200mhz when the timing mode is set to manual users can set the memclock index value manually 38
- To view the following screen 38
- Using bios 38
- Using bios 39
- Ide function setup press enter 40
- Integrated peripherals 40
- Onchip ide channel0 1 enabled use these items to enable or disable the pci ide channels that are integrated on the mainboard 40
- Primary secondary master slave pio auto each ide channel supports a master device and a slave device these four items let you assign the kind of pio programmed input output was used by the ide devices choose auto to let the system auto detect which pio mode is best or select a pio mode from 0 4 40
- These options display items that define the operation of peripheral components on the system s input output ports 40
- Using bios 40
- Raid config press enter 41
- Using bios 41
- Ac 97 audio auto 42
- Enable this item if you plan to use a mouse connected through the usb port in a legacy operating system such as dos that does not support plug and play 42
- Enables and disables the onboard audio chip disable this item if you are going to install a pci audio add in card 42
- Onboard device press enter 42
- Onboard lan auto 42
- Onchip usb v1 v2 42
- This item enables users to enable or disable the onchip usb function setting it to be usb1 or usb2 compatible 42
- This item lets you enable or disable the usb keyboard storage device support 42
- This option allows you to enable disable the onboard lan controller 42
- To return to the integrated peripherals page 42
- To view the following screen 42
- Usb legacy support enabled 42
- Usb mouse support disabled 42
- Using bios 42
- Superio device press enter 43
- Using bios 43
- Acpi is an power management specification that makes hardward status informa tion available to the operating system acpi enables a pc to turn its peripherals on and off for improved power management it also allows the pc to be turned on and off by external devices so that mouse or keyboary activity wakes up the computer 44
- Acpi suspend type s3 str 44
- Ide hdd block mode enabled enable this field if your ide hard drive supports block mode block mode enables bios to automatically detect the optimal number of block read and writes per sector that the drive can support and improves the speed of access to ide devices 44
- Init display first pci slot use this item to specify whether your graphics adapter is installed in one of the pci slots or is integrated on the motherboard 44
- Power management setup 44
- This option lets you control system power management the system has various power saving modes including powering down the hard disk turning off the video suspending to ram and software power down that allows the system to be automatically resumed by certain events 44
- To return to the main bios setting page 44
- Use this item to define how your system suspends in the default s3 str the suspend mode is a suspend to ram i e the system shuts down with the exception of a refresh current to the system memory 44
- Using bios 44
- Video off method dpms supported this item defines how the video is powered down to save power this item is set to dpms display power management software by default hdd power down disabled the ide hard drive will spin down if it is not accessed within a specified length of time 44
- Using bios 45
- Pnp pci configurations 46
- These options configure how pnp plug and play and pci expansion cards operate in your system both the the isa and pci buses on the motherboard use system irqs interrup requests and dmas direct memory access you must set up the irq and dma assignments correctly through the pnp pci configurations setup utility for the motherboard to work properly selecting pnp pci configurations on the main program screen displays this menu 46
- Using bios 46
- Cpu vcore voltage 1 v 3 v 5v 12v 5v_stby cpu temperature system temperature cpu_fan speed sys_fan speed pwr_fan speed 47
- On motherboards that support hardware monitoring this item lets you monitor the parameters for temperatures and fan speeds 47
- Pc health status 47
- Shutdown temperature disabled enables you to set the maximum temperature the system can reach before powering down 47
- System component characteristics these fields provide you with information about the systems current operating status you cannot make changes to these fields 47
- This item enables or disables the warning temperature function 47
- Using bios 47
- Warning temperature disabled 47
- Exit without saving 48
- Load optimized defaults 48
- Save exit setup 48
- Set supervisor user password 48
- Using bios 48
- Using bios 49
- About the software cd rom 51
- Auto installing under windows 98 me 2000 xp 51
- Chapter 4 using the motherboard software 51
- Using the motherboard software 51
- Running setup 52
- Using the motherboard software 52
- Drivers and software are automatically installed in sequence follow the onscreen instruc tions confirm commands and allow the computer to restart a few times to complete the installation 53
- Using the motherboard software 53
- Ami award flash utility 54
- Manual installation 54
- Using the motherboard software 54
- Utility software reference 54
- Winflash utility 54
- Caractéristiques 55
- Chipset 55
- Codec audio 55
- Français 55
- Lan interne optionnel 55
- Multi language translation 55
- Mémoire 55
- Processeur 55
- E s intégrées 56
- Français 56
- Microprogramme bios 56
- Multi language translation 56
- Options d extension 56
- Audio codec 57
- Chipsatz 57
- Deutsche 57
- Feature 57
- Integriertes lan optional 57
- Multi language translation 57
- Prozessor 57
- Speicher 57
- Bios firmware 58
- Deutsche 58
- Erweiterungsoptionen 58
- Integrierte i o schnittstellen 58
- Multi language translation 58
- Caratteristiche 59
- Chipset 59
- Codec audio 59
- Italiano 59
- Lan integrata opzionale 59
- Memoria 59
- Multi language translation 59
- Processore 59
- Firmware bios 60
- I o integrati 60
- Italiano 60
- Multi language translation 60
- Opzioni di espansione 60
- Característica 61
- Chipset 61
- Codec de audio 61
- Español 61
- Lan abordo optativo 61
- Memoria 61
- Multi language translation 61
- Procesador 61
- Bios firmware 62
- Español 62
- I o integrado 62
- Multi language translation 62
- Opciones de expansión 62
- Características 63
- Codec áudio 63
- Conjunto de chips 63
- Memória 63
- Multi language translation 63
- Onboard lan opcional 63
- Português 63
- Processador 63
- I o integrado 64
- Microprogramação bios 64
- Multi language translation 64
- Opções de expansão 64
- Português 64
- Audio codec 65
- Multi language translation 65
- オンボードlan オプション 65
- チップセット 65
- プロセッサ 65
- メモリ 65
- 日本語 65
- 機能 65
- Biosファームウェア 66
- Multi language translation 66
- 拡張オプション 66
- 日本語 66
- 統合の入出力ポート 66
- Multi language translation 67
- 메모리 67
- 보드 내장 lan 선택 사항 67
- 오디오 코덱 67
- 칩셋 67
- 특성 67
- 프로세서 67
- 한국어 67
- Bios 펌웨어 68
- Multi language translation 68
- 통합 i o 68
- 한국어 68
- 확장 옵션 68
- Multi language translation 69
- 內建區域網路 選購 69
- 功能 69
- 晶片組 69
- 繁體中文 69
- 處理器 69
- 記憶體 69
- 音頻編碼器 69
- Bios 韌體 70
- Multi language translation 70
- 擴充選項 70
- 整合 i o 70
- 繁體中文 70
- Multi language translation 71
- Onboard lan 可选 71
- 内存 71
- 功能 71
- 处理器 71
- 简体中文 71
- 芯片组 71
- 音频编解码器 71
- Multi language translation 72
- 扩展选项 72
- 简体中文 72
- 集成 i o 72
- Multi language translation 73
- Аудио codec 73
- Встроенный сетевой адаптер lan опционально 73
- Память 73
- Процессор 73
- Русский 73
- Характеристики 73
- Чипсет 73
- Multi language translation 74
- Возможности расширения 74
- Интегрированный вход выход 74
- Русский 74
- Audio codec 75
- Chipset 75
- Multi language translation 75
- Pamięć 75
- Polski 75
- Procesor 75
- Zintegrowana obsługa sieci lan opcjonalnie 75
- Firmowy bios 76
- Możliwości rozbudowy 76
- Multi language translation 76
- Polski 76
- Zintegrowane we wy 76
- Multi language translation 77
- Paměť 77
- Procesor 77
- Vestavění síťové rozhraní lan volitelně 77
- Vlastnosti 77
- Zvukový kodek 77
- Česky 77
- Čipová sada 77
- Firmware bios 78
- Integrovaný vstup výstup 78
- Možnosti rozšíření 78
- Multi language translation 78
- Česky 78
- Audio codec 79
- Caracteristici 79
- Memoria 79
- Multi language translation 79
- Opţiuni de extindere 79
- Procesorul 79
- Română 79
- Setul de chipuri 79
- Firmware bios 80
- I o integrată 80
- Multi language translation 80
- Onboard lan opţional 80
- Română 80
- Audio codec 81
- Multi language translation 81
- Български 81
- Интегриран мрежов контролер опция 81
- Памет 81
- Процесор 81
- Спецификация 81
- Чипсет 81
- Bios firmware 82
- Multi language translation 82
- Български 82
- Възможности за разширяване 82
- Интегриран вход изход контролер 82
- Alaplapon levő lan választható 83
- Audio codec 83
- Jellemző 83
- Lapkakészlet 83
- Magyar 83
- Memória 83
- Multi language translation 83
- Processzor 83
- Beépített i o 84
- Bios firmware 84
- Bővítési lehetőségek 84
- Magyar 84
- Multi language translation 84
Похожие устройства
- ECS Elitegroup NFORCE4-A939 Руководство пользователя
- ECS Elitegroup RX480-A Руководство пользователя
- ECS Elitegroup KA1 MVP Руководство пользователя
- ECS Elitegroup KN1 Extreme Руководство пользователя
- ECS Elitegroup KN1 SLI Lite Руководство пользователя
- ECS Elitegroup KN2 SLI Руководство пользователя
- ECS Elitegroup D6VAA Руководство пользователя
- ECS Elitegroup MB694A Руководство пользователя
- ECS Elitegroup X79R-AX Руководство пользователя
- ECS Elitegroup X79R-AX Deluxe Руководство пользователя
- ECS Elitegroup A55F-A Руководство пользователя
- ECS Elitegroup A55F-A2 Руководство пользователя
- ECS Elitegroup A55F-M2 (V1.0A) Руководство пользователя
- ECS Elitegroup A55F-M2 (V2.0) Руководство пользователя
- ECS Elitegroup A55F-M3 Руководство пользователя
- ECS Elitegroup A55F-M4 (V1.0) Руководство пользователя
- ECS Elitegroup A55F-M4 (V2.0) Руководство пользователя
- ECS Elitegroup A75F-A Руководство пользователя
- ECS Elitegroup A75F-M Руководство пользователя
- ECS Elitegroup A75F-M2 (V1.0/V1.0A) Руководство пользователя