Intel r1304gz4gc [11/20] Install add in card s
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Intel r1304gz4gc [11/20] Install add in card s

Intel r1304gz4gc [11/20] Install add in card s
7
General Installation Process
9
Install Optical Drive
A
B
IMPORTANT NOTE: If you do not
install a device at this location,
install the optical device bay filler
panel shown below. This is
required to maintain proper
system cooling.
Rear View
of Optical
Drive
A
Install the plastic guide onto the back
of the drive and attach with two screws
as shown.
Insert the optical drive into chassis opening
and push all the way until it stops.
C
Connect the cables as shown.
Optical
Device
Assembly
B
Data
Power
Optical
Drive
C
10
Install the Air Duct
Align the two holes on the air duct with the alignment
pins on the chassis and install the air duct into place.
Use care to avoid pinching system cables.
11
Remove Add-in Card
Riser Assembly
Grasp the riser assembly with
both hands and pull up to
remove from system.
CAUTION:
Place the riser
assembly
upsidedown to
avoid damage
to the riser card
connector.
Riser Card
Connector
12
Install Add-in Card(s)
• Full-height PCIe Card Shown
A
B
C
CAUTION:
Observe normal ESD precautions
when installing add-in cards.
Insert the add-in card until it sits in the riser connector.
Secure the add-in card with the screw as shown.
NOTE: Make sure that all empty add-in card slots have
filler panels installed.
NOTE: Add-in card install sequence for low-profile add-in
cards is the same.
REMOVE Filler Panel
A
B
Add-in Card
Riser Connector
C
A
Remove the filler panel from the add-in card slot and
remove the screw as shown.

Содержание

Похожие устройства

Скачать