Kaiser HGE 50508 MKR [24/80] Gas cooking zones control

GAS COOKING ZONES CONTROL

Before using your new appliance, we ask you to do

the following:

• Read carefully the operating instructions and

safity conditions.

• Remove the packaging, empty the drawer,

clean the oven cavity in order to eliminate

preservative agents.

• Check up functional efficiency of the stop

valves (installation junction and that of the

cooker) as well as the other control units.

• Heat up the oven (at 250° C for 30 min.)

• Service the cooker only in case of duly

ventilation.

The cooking zones control is achieved by means

of rotary switches 1, 2, 3 and 4 set up on the

control panel of the cooker.

All gas cookers XL 500 are provided with the

system of electrical ignition operated by means of

rotary switches.

To switch on a gas burner:

• Press the corresponding rotary switch of the

selected burner against the stop and turn it to

the left up to the position strong gas supply.

• Keep the switch pressed till the burner ignites.

• After the burner has ignited, let the rotary

switch go and select the required flame volume

(e.g. sparing flame).

• To switch off the burner after the food is ready

turn on the rotary switch to the right (position

“off”).

If your appliance is provided with gas control

system for the burners and the oven, to ignite a

burner press the rotary switch against the stop

and keep it in the position “strong gas supply”

to activate the control system.

Attention! It is not allowed to adjust gas

supply between the position burner off

and the position strong gas supply