Al-Ko HWA 1300 F [14/134] Removing and mounting of non return valve cleaning hwa 1300 f

Your domestic water system is susceptible to low

temperatures. Make sure to empty the device of

residual liquid (hoses, pump and reservoir) and

store it so that it is protected from frost.

• If the pump runs trouble-free, put it into

operation as described in the instructions.

Removing and mounting of non-return

valve, cleaning (HWA 1300 F)

• Empty the suction and pressure hoses.

• Remove the filter (see Section "cleaning the

filter").

• Remove the draining screw (6) and (7) (HWA

1300 F) drain all water from the pump cham-

ber.

• Unscrew the non-return valve (21) and clean

it under flowing water.

• Replace the draining screw and store the

device so that it is protected from frost.

• Renew seal (22) if necessary.

• Install the non-return valve.

• Install the filter and filter cover.

Frost protection

Disposal

RL 2002/96 EG

Do not dispose of worn-out units through the household garbage!

The appliance, its packaging and accessories are all produced from recyclable

materials and must be disposed of accordingly.

GB 5 Translation of original user instructions