Home
Главная
Vitek
Кофеварка
VT-1524 GD
Инструкция по эксплуатации Страница: 6

Vitek VT-1524 GD [6/36] English

ENGLISH

• After you finish frothing milk switch the steam

supply off by turning the handle (14) clock-

wise as far as it will go.

• Pour the frothed milk into the espresso cup.

• Clean the cappuccinator pipe (15) and the tip

(17) right after milk or cream frothing. To do

this, put the cappuccinator pipe with the tip into

a glass of water, switch the steam supply on by

setting the steam supply handle (14) counter-

clockwise and after that switch the steam sup-

ply off by setting the steam supply handle (14)

to the utmost right position as far as it will go.

• Wait until the coffee maker cools down and

detach the tip (17) of the cappuccinator pipe

(15), turning the tip (17) in different directions

and wash (rinse) the tip (17) under a water jet.

Note: The next time you make coffee, let the

coffee maker cool down for at least 5 minutes to

avoid the smell of burnt coffee.

Important:

• It is important that milk for making milk froth is

fresh and without additives, therefore so-called

long storage milk is not suitable for this purpose.

It is recommended to take usual whole milk with

fat content from 4% to 6%, cream fat content

should be not less than 10%.

HEATING WATER

You can use hot water from the coffee maker to

preliminary heat up the cups before making cof-

fee or to rinse the cups after use.

• Make sure that there is enough water in the

water tank (13) and the steam supply han-

dle (14) is set to the utmost right position and

slightly tightened.

• Place a suitable bowl on the tray grid (2).

• Insert the power plug into the mains socket.

1. Press the button (9) and wait until the indica-

tor stops flashing and lights constantly.

2. Slowly turn the steam supply control handle

(14) from the utmost right position to the left

at approximately 135 degrees. The pump will

start operating and water will start dispensing.

Place the cappuccinator pipe next to the cup

wall. Be careful to avoid burns!

3. After you finish this operation switch the water

supply off by turning the handle (14) clock-

wise as far as it will go.

WARMING THE DRINKS

You can warm up your drinks by putting the cap-

puccinator pipe (15) without the tip (17) into the

cup with the drink.

• Remove the tip (17) from the cappuccinator

pipe (15).

• Make sure that there is enough water in the

water tank (13) and the steam supply handle

(14) is set to the utmost right position.

• Place a suitable bowl on the tray grid (2).

• Insert the power plug into the mains socket.

1. Press the button (10) and wait until the indica-

tor stops flashing and lights constantly.

2. Turn the steam supply control handle (14)

from the utmost right position to the left,

steam will start going out from the cappucci-

nator pipe (15).

Note: First the cappuccinator pipe will release

some hot water; to obtain dry water steam it is

necessary to release the steam with water into an

appropriate container during several seconds.

Be careful to avoid burns!

3. Switch the steam supply off by turning the

handle (14) to the utmost right position as far

as it will go and place the cappuccinator pipe

next to the coffee cup wall.

4. Slowl turn the steam supply control handle

(14) from the utmost right position to the left,

steam will start going out from the cappuc-

cinator pipe (15) and warm up the drink. Set

the steam release intensity at your discretion.

5. After you finish heating the drink switch the

steam supply off by turning the steam supply

control handle (14) clockwise as far as it will go.

Note: If the steam supply intensity decreases

or the steam supply stops, perform the actions

described in the section “Heating water”. This

will lead to filling the boiler with hot water and the

steam supply will return to normal.

DESCALING

For effective operation of the coffee maker we

recommend to remove scale every month and

more often when you use “hard” water.

Regular descaling extends the coffee maker

operating life and decreases the hazard of dam-

aging the unit.

Untimely descaling, as well as non-observance

of these instructions and mishandling the coffee

maker are not covered by warranty.

• Make citric acid solution (the proportion of cit-

ric acid and water should be 3:100).

• Make sure that no buttons are pressed and

the steam supply handle (14) is set to the

utmost right position.

• Remove the filter holder (5) from the coffee

maker boiler by turning the filter holder handle

IM VT-1524.indd 6 29.06.2016 17:37:39

Vitek VT-1524 GD [6/36] English

Содержание

Похожие устройства