Vitek VT-8266 BK [4/20] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8266 BK [4/20] English

Vitek VT-8266 BK [4/20] English
ENGLISH
4
Charging (pic. 1)
Before using the shaver for the first time or
after a long period of inactivity the battery
needs to be charged for 8 hours.
• Insert the power cord (8) jack into the
connector (6) and connect the plug to
the mains, the charging indicator (5)
will light up.
• Battery recharging cycles should not
exceed two hours.
Note:
– Recharge the battery only after its
complete discharge.
– Charge the accumulator batteries at
the temperature from 0° C to +35° C.
– If you didn’t use the shaver for a month
or longer, charge it completely before
using.
Usage
The best shaving results are achieved if your
skin is dry. Your skin may need 2-3 weeks to
get used to this shaving system.
• Remove the protective cap (9).
• Switch the shaver on, setting the switch
(4) to the «I» position.
Note: You can switch the shaver on only if
the lock button on the switch (4) is pressed.
• Touching the skin slightly, move the
shaving block back and forth and rota-
tionally at the same time.
• After shaving switch the shaver off by
setting the switch (4) to the «0» posi-
tion, cover the shaving block (1) with
the protection cap (9) and take the
shaver away for storage.
• It is recommended to clean the shaving
block (1) after every use.
• Press the release button (2) and
remove the shaving block (1), clean it
both from the inside and outside with
the brush (10), clean the blades drive
and install the shaving block (1) back
to its place (pic. 2, 3, 4, 5).
Using of trimmer (pic. 6)
The trimmer is intended for trimming side-
burns and mustache.
• Move the trimmer lock (7) upwards.
• Switch the shaver on, setting the switch
(4) to the «I» position.
• Place the trimmer under the right
angle to your skin and move it gradu-
ally downwards to trim mustache or
sideburns.
• Switch the shaver off by setting the
switch (4) to the «0» position and close
the trimmer by pressing it.
CLEANING AND CARE
Clean the shaving block (1) after every
using or after several operation cycles of
the shaver.
• For easy cleaning of the shaving block
(1) remove it from the shaver body
(pic. 2, 3).
• Using the brush (10) clean the shaving
block (1) both from the inside and out-
side, clean the blades drive (pic. 4, 5).
• Install the shaving block (1) to its place,
cover it with the protection cap (9) and
take the shaver away for storage.
• It is recommended to clean the shav-
ing heads every two months (pic. 7, 8).
• Switch the shaver off by setting the
switch (4) to the «0» position.
• Press the release button (2) and
remove the shaving block (1).
• Press and turn the frame clamp coun-
terclockwise and remove the frame.
• Remove every stationary net together
with the rotating blade.
Note: Be careful when removing the sta-
tionary nets; install the rotating blades to
the same stationary nets after cleaning,
otherwise fitting of rotating blades to the
nets will take some time and this may affect
the quality of shaving.
• Clean the rotating blades and the sta-
tionary nets with the brush.
• Install the stationary nets into the shav-
ing block; ensure that nets are fixed; to
fix the net turn it clockwise or counter-
clockwise.
• Insert the rotating blades into the sta-
tionary nets.
IM VT-8266.indd 4 15.12.2016 11:38:07

Содержание

Похожие устройства

Скачать