Zigmund & Shtain EN 122.921 S [17/48] Page 18

of the screen will begin to flash. Using the (+) and (-) keys, adjust the day’s time while this dot

is flashing. After the adjustment, it should be expected that the dot will be lit continuously.

This function can be used to recieve audible warning at the completion of the adjusted time

period.

Press the MODE key in the middle. The symbol will flash on the screen. Also three “0”s will

appear. Adjust the desired time period for the warning by using (+) and (-) keys while the

symbol is flashing. Some time after the completion of the adjustment, the symbol will begin

to light continuously. When the symbol begins to light continuously, the audible warning

time adjustment is done.

The audible warning time can be set to a time between the time range of 0 and 23.59.

When the set time is up, the timer gives an audible warning and the symbol begins to flash

on the screen. Pressing any key will stop the audible warning and the symbol disappears

on the screen.

Audible Warning time adjustment is for warning purposes only. The oven will not be

activated at this function.

Semi - Automatic Time Adjustment According to Cooking Period :

this position. Some time after the adjustment operation is completed, the day’s time wil

appear on the screen and the symbols (A) and will begin to continuously light on the

screen. While doing this, the oven will also start to operate.

A cooking period between the time range of 0 and 10 hours can be set. At the completion

of the set duration, the timer wil stop the oven and give an audible warning. Also, the symbol

(A) will begin to flash on the screen. After bringing the oven button and oven thermostat

button to 0 position, pressing any button of the timer will end the audible warning. Also, the

timer wil be brought to manual use function.

Semi-Automatic Programming According to Finish Time:

This function is used to cook according to desired finishing time. The food to be cooked is put

into the oven. The oven is adjusted to the desired cooking function. The oven thermostat is

adusted to the desired degree depending on the dish to be cooked. Keep pressing on the

MODE button until you see “end” on the timer screen, the symbol (A) and the day’s time will

respectively begin to flash.

MODE

This function is used to cook in the desired time range. The foods

to be cooked are put into the oven. The oven is adjusted to the

desired cooking function. The oven thermostat is adjusted to the

desired degree depending on the dish to be cooked. Keep

pressing on the MODE button until you see “stop” on the timer

screen. When you see “stop” on the timer screen, the symbol

(A) will begin to flash. Adjusted the cooking period for the food

you wish to cook, by using the (+) and (-) keys while the timer is in

Figure 20