Zigmund & Shtain EN 122.921 S [22/48] Page 20

PART 5: CLEANING AND MAINTENANCE OF YOUR OVEN

5.1. CLEANING

Before starting to clean your oven, be sure that all control buttons are off and your appliance

is cooled off. Unplug the appliance.

Do not use cleaning materials containing particles that might scratch the enamelled and

painted parts of your oven. Use cream cleaners or liquid cleaners, which do not contain

particles. As they might harm the surfaces, do not use caustic creams, abrasive cleaning

powders, rough wire wool or hard tools. In the event the excess liquids spilling over your

oven should burn, it may cause a damage to the enamel. Immediately clean up the split

liquids. Do not use steam cleaners for cleaning the oven.

Cleaning the interior of the oven

Make sure to unplug the oven before starting to clean it. You will obtain best results if you

clean the oven interior while the oven is slightly warm. Wipe your oven with a soft piece of

cloth dampened with soap water after each use. Then wipe it again, this time with a wetted

cloth, and wipe it dry. A complete cleaning using dry and powder type cleaners. For product

with catalytic enamel frames, the rear and side walls of the inner frame do not require

cleaning. However; depending on usage, it is recommended that you replace them after a

certain period of time.

5.2. MAINTENANCE

Replacing the Oven Light

The change of oven lamp must be done by authorized technician. The rating of the bulb

should be 230V, 25Watt, Type E14,T300 before changing the lamp,the oven should be

plugged off and it should be cool.

The lamp design is specific for the use in household cooking appliances and it is not suitable

for household room illumination.