Hotpoint-Ariston WK 24E UP0 [16/76] Before first use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston WK 24E UP0 [16/76] Before first use

Hotpoint-Ariston WK 24E UP0 [16/76] Before first use
16
iten
PARTS AND FEATURES
1. Water gauge
2. Kettle
3. Spout
4. Limescalelter(removable)
5. Lid
6. Lid opening button
7. Handle
8. Display
9. Temperature setting button
10. Start/stop button
11. Cable
12. Base
INTRODUCTION
Thankyouforpurchasingourproduct.
In doing so, you have opted for an effective high-
performance appliance.
If the instructions on the correct use of this appliance
are not observed, the manufacturer shall assume no
responsibilityforanyresultingdamage.
The operating instructions may refer to different
models:anydifferenceisclearlyidentied.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without
water,theboil-dryprotectionwillautomaticallyswitchoff
thedisplay.Thisisanormalprotectiondeviceandthe
displaywillswitchoninfewminutes.Ifthisoccurs,allow
thekettletocooldownbeforellingwithcoldwater.
BEFORE FIRST USE
Carefully wipe the outside of the appliance to remove
any dust that may have accumulated. Dry with a dry
cloth.Donotimmersethesupplycordinwaterorother
liquids.Ifyouareusingthekettleforthersttime,itis
recommendedthatyoucleanitbeforeusebyboilinga
fullkettleofwatertwiceanddiscardingthewater.
OPERATION OF YOUR KETTLE
Usethekettleonlywithitsincludedbase.
1. Tollthekettle,removeitfromthepowerbaseand
openthelidbypressingthelidopeningbutton,ll
with the desired amount of water, and then close
thelid.Alternatively,thekettlemaybelledthrough
thespout.Thewaterlevelshouldnotexceed the
maximumlevelorsitbelowtheminlevel.Toolittle
waterwillcausethekettletoswitchoffbeforethe
water has boiled.
The maximum capacity of the kettle is 1.7L. Do
not add water over the maximum level, as it
may spill out of the spout when boiling. Ensure that
the lid is rmly in place before connecting the plug
into a power outlet.
2. Positionthekettleonthepowerbase.
3. Connect the plug into a power outlet.
4. Press the temperature setting button to set the
temperature to 50, 60, 70, 80, 90, 100 or 100P.
in 100P mode, the kettle keeps on boiling the
water for 10 minutes, then stops. Use this function
todeletechlorineodororsterilizewater.Thedisplaywill
alwaysshowthetemperatureofthewaterinsidethejug.
5. Press START/STOP button.
6. When the water has reached the selected
temperature, the kettle ring and automatically
switchtokeep-warmmodefor1hour.Tocancelthis
mode press the START/STOP button.
Automatic keep-warm function doesn’t work at
100°C.
After nish keeping warm, the LCD display will
indicate the actual water temperature and the
kettle will shut off automatically and enter into energy-
savingmodeafterbeinginstand-bymodefor5minutes
when the actual water temperature decreases to less
than 45°C.
7. If the temperature cannot be set, this means that
the water in the kettle is hotter than the desired
temperature.Youcanturnoffthekettleatanytime
bypressingthecancelbutton.
The selected temperature can be changed at
any time while the kettle is heating up. While
the kettle is heating up, the current temperature
lights up.
Be careful when pouring the water from your
kettle as boiling water may cause scalds.
Open the lid carefully while the water in the kettle is
hot.
Below 45° C, the kettle automatically shuts
down and goes into “standby” mode.
If the container is removed and re-introduced before
the heating process is over, the settings stay active
for a few minutes.

Содержание

Похожие устройства

Скачать