Kuppersberg GL 6088 [15/48] Dishwasher

Kuppersberg GL 6088 [15/48] Dishwasher
15
english Technical passporT
dishwasher
2. Remove the cup lter B by exerting a
slight pressure on the side  aps.
3. Slide out the stainless-steel plate  lter C.
4. Inspect the trap and remove any food
residues. NEVER REMOVE the wash-cycle pump
protection (black detail).
After cleaning the lters, re-place the lter
assembly and x it in position correctly; this
is essential for maintaining the ef cient
operation of the dishwasher.
The dishwasher must not be used without
lters or if the fi lter is loose.
Clean the fi lters regularly.
CLEANING THE SPRAY ARMS
On occasions, food residue may become
encrusted onto the spray arms and block the
holes used to spray the water. It is therefore
recommended that you check the arms from
time to time and clean them with a small non-
metallic brush.
To remove the upper spray arm, turn the
plastic locking ring in an anti clockwise
direction. The upper spray arm should be
replaced so that the side with the greater
number of holes is facing upwards.
The lower spray arm can be removed
by pressing on the side tabs and pulling it
upwards.
LEAVING THE MACHINE UNUSED FOR
EXTENDED PERIODS
Disconnect the appliance from the electricity
supply and shut off the water tap.
Leave the door of the appliance ajar.
When you return, run a program when the
dishwasher is empty.

Содержание

Похожие устройства