Freggia WDIE14106 [19/64] Description of the appliance

remove the locking screws with a suitable tool. Insert a screwdriver in the

holes and lever out the 4 plastic spacers as shown in the  gure.

LEVELLING THE WASHING MACHINE

After having selected the most suitable location for the appliance, make sure it is level by

regulating the adjustable feet (Fig. 6).

Pay particular attention to the positioning and levelling of the washing machine and

make sure that the lock nuts are tight.

If the appliance is not levelled correctly, it will be unstable and noisy and may

cause damage.

If the washing machine is installed on a carpeted  oor, leave su cient space between

the appliance and the  oor to guarantee the free circulation of air.

It is not advisable to install the appliance in rooms where the temperature could fall

below 0°C.

INSTALLING THE WASHING MACHINE

Installation must be carried out by quali ed personnel in line with the

instructions supplied by the manufacturer.

Incorrect installation may result in damage and injury.

The appliance can be installed anywhere providing that the ambient

temperature is not less than 3°C and that the wires or pipes on the rear of the

machine are not squashed.

WARNING!! The washer/drier version must not be installed behind

a locked door, a sliding door or with a hinged door on the opposite

wall to the washer/drier itself.

For transport reasons, the washing machine’s oscillating group is

locked in place by 4 spacers and screws. Before using the machine,

remove the spacers and locking screws. Keep the screws and

spacers for future use. Close o the holes using the plugs supplied.

The plugs can be found in the bag containing the documents.

For transport reasons, the washing machine’s oscillating group is

locked in place by 4 spacers and screws. Before using the machine,

DESCRIPTION OF THE APPLIANCE

A - DOOR

B - FILTER

C - ADJUSTABLE FEET

D - TOP COVER

E - DRUM

F - CONTROL PANEL

G - DETERGENT DRAWER