Vitek VT-3539 — инструкция по настройке времени и сигнализации для устройства [6/64]

Превью страниц Страница 6 / 64

ENGLISH

1. While in current time display mode, press

and hold the Channel button for 3 seconds.

2. An audible alert will be heard. This means

the detection function has been activated.

3. Each time a remote sensor is located, an

audible alert will be emitted and the “CH”

symbol will blink on the display.

4. Temperature data from the remote sensor

will be displayed on the LCD.

• The auto-detect function is runs automatically for about 3 minutes.

• If the detection function finished unsuccessfully, make sure that the remote sensors

are located within the operating range of the receiver or try moving them to a new

location.

SETTING THE TIME AND ALARM

Setting the time:

1 Press and hold the Mode/Snooze but-

ton for 3 seconds to enter the time settings

mode.

2 Set the desired hours by pressing the

Hour/+/Max button.

3 Set the desired minutes by pressing the

Minute/-/Min button.

4 Press the Mode/Snooze button to save the settings.

• Press the Alarm/°C/°F button to switch between 12-hour and 24-hour time for-

mats.

Setting the alarm:

5 Press the Mode/Snooze button to choose the Clock Alarm mode; the “AL” symbol

will appear on the display.

35391.indd 635391.indd 6 23.05.2006 17:08:5123.05.2006 17:08:51