Gold Medal 5038EX [5/14] Removing excess carbon

5 Models: 5021, 5021ET, 5021T, 5024, 5024ET, 5025, 5025,

5038, 5042, 5044, 5044ET, 5044T, 5051, 5051ET, 5055ET

General Instructions (Standard Machine)

1. Always use fresh batter and do not allow it to warm up too much.

2. Frequent cleaning with a soft-bristled brush, and re-seasoning the grids as needed

during operation, will ensure a great tasting product.

3. Leave the grids in the closed position whenever possible because open grids cause

excessive carbon build-up.

4. If the baker is on for over an hour with no baking, lightly brush Free-N-Easy (Gold Medal

Item #2250QT) on the grids before baking.

5. Never apply beeswax, paraffin, or any other waxes to grid surfaces.

Removing Excess Carbon

1. Make sure appliance is cool and dry.

2. Un-plug machine from outlet.

3. Place a shallow drip pan under the grids.

4. Open top grid and spray a generous portion of Kleen-Sweep (Gold Medal Item #

2173CN) on grids, and allow to soak for at least a 1/2 hour. See Kleen-Sweep warning

below.

5. Using a bristle brush, do a general scrubbing on all grid surfaces that had Kleen-Sweep

applied to them. Using a spray bottle, spray GRIDS ONLY with cold water to rinse away

Kleen-Sweep.

6. Scrub grid surfaces with warm-soapy water (also applied with spray bottle) to remove

remaining Kleen-Sweep.

7. Use a damp cloth or sponge to wipe down the rest of the baker, to remove any splatter.

8. Re-season grids as described in GRID SEASONING section on previous page.