Castel MAC TC 60 N Инструкция по эксплуатации онлайн [10/17] 272070
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Castel MAC TC 60 N Инструкция по эксплуатации онлайн [10/17] 272070

Castel MAC TC 60 N Инструкция по эксплуатации онлайн [10/17] 272070
10
GB
When the desired language is displayed,
press the
ENTER button; the controller
requests a second confirmation, displaying
EXIT or CONFIRM.
Press the button to confirm or the
ENTER
button to exit and return to the first box.
4.3 Date and time setting
Press the MENU button and with the or
buttons go to
MENU 8 SET CLOCK;
press
ENTER and the date and time will be
displayed with the first figure of the day flash-
ing. Change the figure with the or buttons
and confirm the value with the
ENTER but-
ton; the new value is stored and the month
figure will flash.
Repeat the procedure until arriving at the
seconds value, then press the
ENTER but-
ton. When the values have been stored, the
date and time will flash.
4.4 Set-point display and setting
Press the MENU button and with the or
buttons go to
MENU 2 CHANGE SET
POINT
; press the ENTER button; the set
temperature and the temperature to be mod-
ified will be displayed. Modify the
NEW SET
temperature using the button to increase
the value by N degrees and the button to
decrease the value by N degrees. To store
the new set temperature press the
ENTER
button.
The new value will flash to confirm it has
been stored.
4.5 HUMIDITY ADJUSTMENT
(on TC60C only)
Press the MENU and use the
or
but-
tons to open the
MENU 3 - CHANGE HUMID-
ITY window; press ENTER; the current
humidity level and the new one to be set will
be shown. Use the
or
buttons to
change the humidity
NEW RH% and press
ENTER to confirm. The value will blink to
confirm it has been accepted.
Humidity values can be varied within an
accepted range of 40% to 90%.
4.6 CONTINUOUS COOLING FUNCTION
Hold the button for a few seconds to turn
on the continuous cooling function.
CONTINUOUS COOLING will appear on the
display; press
or
to set the continu-
ous running time limit of the compressor
(MAX 6 HOURS). With this function,
HIGH/LOW temperature alarms are inhibited.
At the end of Continuous Cooling the preser-
vation unit returns to normal working condi-
tions.
4.7 Door microswitch function
The controller signals door opening, showing
the following box on the display:
The evaporator fans will stop each time one
of the doors is opened and will restart when
the door is closed. If the door stays open for
more than 5 minutes, the warning buzzer is
activated and the evaporator fans will restart
as though the door were closed.
DOOR OPEN >>OK
Cell -21°C
NEW SET: -15°C
PRESENT: -15°C
Menu 2
CHANGE SETPOINT
Date: 12/04/03
Time: 11:54:23

Содержание

Похожие устройства

Скачать