Castel MAC TC 60 N [9/17] Programming instruction
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Castel MAC TC 60 N [9/17] Programming instruction

Castel MAC TC 60 N [9/17] Programming instruction
9
GB
4.1 Starting up the appliance
Power up the preservation unit using the
main switch.
Switch on the controller, holding down the
ON/OFF pushbutton. The controller will dis-
play the welcome message and show the
installed software and go to the following
box:
Message with compressor switched off and
display of temperature inside cell.
The cabinet prepares for operation at the
preset temperature.
Message with compressor switched on and
display of temperature inside cell.
The display shows the temperature detected
by the sensor inside the cell.
To switch off the controller, hold down the
ON/OFF pushbutton for 5 seconds; after
this the controller will go on a low voltage
stand-by operation mode and will display the
following boxes:
The message displayed on the LCD screen
in OFF is WAITING with cursor flashing.
IMPORTANT: to turn off the power to the
controller use the main switch.
4.2 Language setting
Press the MENU button and with the or
buttons go to
MENU 7 LANGUAGE;
press the ENTER button to display the first
language. When the or button is
pressed again the available languages are
selected.
Menu 7
LANGUAGE
WAITING _
OFF
COOLING >>OK
CELL -14,5°C
PAUSE >>OK
CELL -14,5°C
4. PROGRAMMING INSTRUCTION
ON/OFF
Continuous
cooling
function
Infrared
data
receiver
Selects the
menus
Decreases
the value
Confirms entering
the selected
menu or
the selected value
Increases
the value

Содержание

Похожие устройства

Скачать