Mitsubishi Electric MFZ-KA50VA [8/30] Air flow velocity and direction adjustment

8

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

■

To change the horizontal direction of the air flow, move the vertical vane manually.

Movement of the horizontal vane

When air comes out from upper air out-

let, down position (4) is set.

However, when air comes out from up-

per and lower air outlets, upper position

When to use ?

Select (AUTO) for most

situations.

■ Recommended air

flow direction is

automatically set.

■ Swing operation is

controller and the

actual operation

range of the

horizontal vane may

differ.

■ The vane does not

move to horizontal

position in COOL

and DRY modes.

The horizontal vane moves intermit-

tently between positions (2) and (4).

The horizontal vane stops for a brief

period at positions (2) and (4).

Select (SWING) for

swing operation.

■ The horizontal vane

directly on

• Change the direction of the vertical vane (upper), hold-

• Change the direction of the vertical vane (lower), holding

the vane.

Always adjust the vane when the damper is open. Opening the

damper forcibly with hands can cause damage or malfunction.

AIR OUTLET SELECTION

With this function, air comes out simultaneously from the upper and lower air outlets so that the room

can be cooled or heated effectively. This function is set using the switch behind the front grille of the

indoor unit. (This function is available in cooling and heating operation.)

(1)

(2)

(3)

(4)

(5)

NOTE:

lets as shown in the table below.

Upper and lower air flow

Room temperature

and set temperature

Upper air flow only

Upper and lower air flow

Air flow temperature

is high.

Upper air flow

Air flow temperature

is low.

(During defrosting

operation, start of

operation, etc.)

NOTE:

Set the air outlet selection switch to the end. Otherwise, air outlet cannot be selected as intended.