Duke FWM3-22PR6-230 (FWM3-22-230) [21/34] Display link hold time temperature

Installation and Operation of Product Holding Cabinets

PUSH BUTTONS

TO CHANGE

DAYPART MENU -

CORRESPONDING LED

WILL TURN ON

(BREAKFAST SHOWN)

DAYPART PROGRAMMING (OPTION)

6. Holding down the button continuously will speed

the time up.

7. When the proper time is reached on the Display

release the Arrow Button and after 5 seconds unit

will accept new time and return to normal operation.

Menu Mode

This option is used to change Meal Set and view,

Linking, Hold Time and Hold Temp.

Enter Menu Mode

1. Press and hold the Enter Button for three seconds.

Status LED FLASHES GREEN and “MENU” is

displayed on left Display and “UP” is displayed

on right, indicating upper well information will be

displayed.

2. To view lower well information press the Down Arrow

Button – “DOWN” will appear in the right Display.

FLASHING Status LED will be present on side of

keypad corresponding to well being viewed.

3. Press the Enter Button to accept.

Change Meal Set

Note: The Meal Set can be changed globally from

any keyboard.

1. Status LED stops ashing and “MEAL” “SET1”

appears on the Display.

2. Press the Enter Button again. Status LED

FLASHES indicating edit mode.

3. Use the Arrow Buttons to scroll to desired Meal Set

and press the Enter Button to accept. Status LED

stops ashing and desired Meal Set is displayed.

Display Link, Hold Time & Temperature

Press Arrow Button repeatedly to scroll through Link,

Time and Temperature settings.

Exit Menu Mode

Scroll to EXIT and press the Enter Button to exit

menu mode.