Lainox REV051M [18/32] Operating at the rated heat output

18

90027260rev00

Then, to test the correct functioning of the burners,

exit the screen by pressing 1.

To test chamber burner [br1], turn scroller 5 until

[br1] on display 2, and then start-up the cycle with

the 6“START/STOP”button.

The burner will go in pre-ventilation to then pass on

to the set IGN ignition. The first IGN ignition stage

is indicated on display 4,bythefirstpointunderthe

speed value.

Then, the minimum and maximum speed stages,

indicatedrespectivelyinthesecondandthirdpoints,

will automatically activate.

The correct burner functioning is highlighted by

the increase of the temperature in the cooking

compartment.

To deactivate burner functioning, press button 6

“START/STOP”again.

To exit the cycle press button 1.

During testing, it is possible to manually block the

sequence by pressing button 1;thisway,theburner

blocks in the desired phase (ex. IGN ignition) allowing

the technician to carry out other verifications in this

phase.

Whenaphaseisblocked,thepointindicatingphase

1,2or3flashes.

Torestartthesequence,alwayspressbutton1.

NOTE: in case of maximum speed, the cycle block

becomes pointless since the oven is already working

normally; it is possible to shift to minimum phase by

pressing key 1.

To carry out the tests with the door open, once

the cycle is started, press the “CLIMA” button;

this function is useful during combustion analysis

and for functioning tests of the prolonged burner

without reaching the temperature previously set in

the chamber.

11 • OPERATING AT THE RATED HEAT OUTPUT