![Lainox REV051M [7/32] Special requirements for the installation site](/img/pdf.png)
Lainox REV051M [7/32] Special requirements for the installation site
![Lainox REV051M [7/32] Special requirements for the installation site](/views2/1331519/page7/bg7.png)
7
90027260rev00
3.1 • The room where the oven is to be fitted
has to be well ventilated with all the
openings required for rooms with gas
installations (see specific regulations).
3.2 • In addition, it is good policy to locate the
appliance under an extractor hood so that
cooking vapours can be removed rapidly
and continuously.
3.3 • The room must have a flue gas extraction
stack (appliances with installation type
B13), or a suitable flue gas extraction
system fitted with all relevant safety
devices (appliances with installation type
B23). Further details are given under the
heading: “Gas connection procedures”.
Check with the appropriate agency
whether or not special authorization is
required for the emission of flue gases into
the atmosphere.
3.4 • Current CEI (Italian Electrotechnical
Committee) regulations require the
installation of a multiple pole switch
between the oven and the electrical power
supply; the switch must have a contact
gap of at least 3 mm on each pole.
3.5 • The oven needs two water supplies,
one of which need not be softened, but
must necessarily be cold (for condensing
steam). The other supply, serving the
vaporizer,mustincorporateasoftenerwith
suitable flow and pressure specifications
(see technical data and water connections
heading). A shutoff valve must be installed
on each of the water supply pipelines to
the appliance.
3.6 • The room must have a water drain in a
goodpositionfortheoventobeinstalled,
its specifications are given under the
heading “Water and drain connections” in
this manual.
3.7 • The gas supply plumbing must be installed
in accordance with current regulations,
adopting pipe sections and pressures
suitable for the appliance (see technical
data and gas connections heading).
A fast acting shutoff valve must be installed
on the gas inlet line to the appliance. It is
absolutely essential that this valve should
be specified to current standards and type
test approved.
3.8 • The electrical isolating switch and the
water and gas shutoff valves must all be
located near to the appliance, within easy
reach for the user.
3 • SPECIAL REQUIREMENTS FOR THE INSTALLATION SITE
Содержание
- Capacity 2
- Models 2
- Rev rgv 2
- Versions 2
- X gn 1 1 051 2
- X gn 1 1 10 x gn 1 1 101 2
- X gn 1 1 7 x gn 1 1 071 2
- Contents 3
- General reminders 4
- Table 1 general data electric ovens 5
- Table 2 general data gas ovens 5
- Technical data 5
- Model water pressure 6
- Table 3 general water data 6
- Technical data 6
- Water connection 6
- Special requirements for the installation site 7
- Statutory requirements technical regulations and directives 8
- Positioning 9
- Electrical connections and equipotential bonding 10
- Points to remember when making the electrical connection 10
- Diameter 11
- It is prohibited to reduce the drain it is prohibited to reduce the drain 11
- Perimeter of the oven 11
- The drain line must be outside the the drain line must be outside the 11
- Warning 11
- Water and drain connections 11
- Water connection to the vaporizer 11
- Water pressure 11
- Water specifications 11
- Exhausting flue gases 12
- Gas connection procedures 12
- Leak test 12
- Gas connection procedures 13
- Measuring the inlet pressure 14
- Operating at the rated heat output 14
- Warning the gas system components are fitted for a maximum pressure of 65 mbar higher working pressures are not permissible 14
- Operating at the rated heat output 15
- Chamber burner check the depth of the screw a in accordance with table 5 16
- Checking nominal heat capacity s version 16
- Checkthattheburnerfanspeed corresponds to the data given in table 5 ofthe technical gas data booklet 16
- Operating at the rated heat output 16
- Using a gauge 16
- Operating at the rated heat output 17
- Operating at the rated heat output 18
- Operating at the rated heat output 19
- Commissioning and testing 20
- Important information for the user 21
- Distances to observe 22
- Do not install appliances with a source of heat on the left hand side of the oven 22
- Installation diagrams 22
- Installation diagrams 23
- 3 ac 230 v nr 4 x 2 5 mm 24
- 3n ac 400 v nr 5 x 1 5 mm 24
- Installation diagrams rev 051 m rev 051 s 24
- Rev 051 24
- Ø 40 mm 24
- 3 ac 230 v nr 4 x 6 mm 25
- 3n ac 400 v nr 5 x 2 5 mm 25
- Installation diagrams rev 071 m rev 071 s 25
- Rev 071 25
- Ø 40 mm 25
- 3 ac 230 v nr 4 x 6 mm 26
- 3n ac 400 v nr 5 x 2 5 mm 26
- Installation diagrams rev 101 m rev 101 s 26
- Rev 101 26
- Ø 40 mm 26
- Ac 230 v nr 3 x 1 5 mm 27
- Installation diagrams rgv 051 m rgv 051 s 27
- Rgv 051 27
- Ø 40 mm 27
- 3 ac 230 v nr 4 x 6 mm 28
- 3n ac 400 v nr 5 x 2 5 mm 28
- Installation diagrams rgv 071 m rgv 071 s 28
- Rev 071 28
- Ø 40 mm 28
- 3 ac 230 v nr 4 x 6 mm 29
- 3n ac 400 v nr 5 x 2 5 mm 29
- Installation diagrams rgv 101 m rgv 101 s 29
- Rev 101 29
- Ø 40 mm 29
Похожие устройства
- Lainox REV051M Инструкция по технике безопасности (англ.)
- Lainox REV051M Конструкция Lainox REV051M (англ.)
- Lainox REV051M Электрическая схема
- Berk 20 Бизнес 4 двери с ламинированными рамами цвета венге Инструкция по эксплуатации
- Berk 20 Бизнес 4 двери с ламинированными рамами цвета венге Каталог оборудования Berk
- Эван ЭПВН-48Б Инструкция по эксплуатации
- Эван ЭПВН-48Б Схема
- Эван ЭПВН-48Б Сертификат
- Norpe EUROMAX 195-M-ED-EC-HE BG0088 Инструкция по эксплуатации
- Norpe EUROMAX 195-M-ED-EC-HE BG0088 Торговое холодильное оборудование Norpe
- Эван ЭПВН-42Б Инструкция по эксплуатации
- Эван ЭПВН-42Б Схема
- Эван ЭПВН-42Б Сертификат
- Mimac Babydrop Maxx400 Инструкция по эксплуатации
- Rivacold STL060Z012 Инструкция по эксплуатации
- Rivacold STL020Z012 Инструкция по эксплуатации
- Neoclima NHD-2.2М Инструкция по эксплуатации
- Neoclima NHD-2.1 Инструкция по эксплуатации
- Mitsubishi Electric PURY-P450YSJM-A Инструкция по установке
- Mitsubishi Electric PURY-P450YSJM-A Сертификат