KAW-МЕТ W1 [46/60] Maintenance policies

46

www.kawmet.pl

•  With the unit at the time of ring, there may be smoke if you installed a ventilation system creates a vacuum in the room

where the appliance is located, this applies to most rooms equipped with a mechanical extraction system VMC (such as the

kitchen, etc.)

•  Ensure that the air required for burning can be taken in sucient quantities from the room where the stove is installed. If

the structure of the building is such that the amount of air is too small to provide oxidation and ventilation should be provided

for the installation of additional air supply.



debris. Refer to the owner’s manual. Do not use abrasive cleaners. The door is always closed with a handle.



When wood burns slowly is formed a black carbon containing organic substances which react with water vapor that is emitted

by the wood, thereby, the walls of the chimney when cold precipitate forms creosote. If the sediment is formed ame lights up with

a very high temperature. Regularly check the build-up of creosote on it to determine the frequency of cleaning the chimney. Please

note that the combustion is more intense the build-up of creosote is less.



The glass in the frame should not be too tight. After installation must be possible to move the glass in the frame. This is

necessary because the glass and metal have dierent coecients of thermal expansion and too tightly attached window has been

destroyed.

(inammable substance emitted when wet wood is burned). Distinctive symptoms of the chimney re are: smell of the ue gas (soot)

in the building, alarming, previously unheard sounds in the chimney, a large increase of the chimney temperature, sparks or ames

coming out from the chimney.



•  immediately call the Fire Brigade

•  extinguish the re in the replace as much as possible, using sand or soil

•  do not extinguish the re with water, since the rapid cooling of the chimney and evaporation of water can cause cracks and

spread of the re

•  cut o the chimney air supply – close the door, close the primary air intake and secondary air intake (if possible)

•  Once the re is extinguished, chimney sweep company should carry out an inspection of chimney technical condition,