Mitsubishi Electric SLZ-KF35VA / SUZ-KA35VA5 [8/28] Operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Mitsubishi Electric SLZ-KF35VA / SUZ-KA35VA5 [8/28] Operation

Mitsubishi Electric SLZ-KF35VA / SUZ-KA35VA5 [8/28] Operation
8
3. Operation
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
<Vane setting>
F1 F2 F3 F4
Fri
Swing Off
LouverVent.Vane
Cool
Room
Set temp.
Mode Temp. Fan
Fri
<Vent. setting>
F1 F2 F3 F4
Fri
Low
Vent.
<Returning to the Main menu>
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Select "Vane·Louver·Vent.
(Lossnay)" from the Main menu
(refer to page 7), and press the
[SELECT] button.
Press the [F1] or [F2] button to go
through the vane setting options:
"Step 1", "Step 2", "Step 3", "Step
4" and "Swing".
Select the desired setting.
Swing
Step 1 Step 2
Step 4
Step 3
Swing
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
4", the vane will be fixed at the
selected angle.
•
under the vane setting icon
This icon will appear when the
vane is set to "Step 2 to Step 4"
and the fan operates at low speed
during cooling or dry operation
(depends on the model).
The icon will go off in an hour, and
the vane setting will automatically
change.
Press the [F3] button to go through
the ventilation setting options in the
order of "Off", "Low", and "High".
* Settable only when LOSSNAY
unit is connected.
Off Low High
Off Low High
• The fan on some models of indoor
units may be interlocked with
certain models of ventilation units.
Press the [RETURN] button to go
back to the Main menu.
Note:
●
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
● Available directions depend on the type of unit connected.
●
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in “STAND BY” or “DEFROST” states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem-
perature setting.

Содержание

Похожие устройства

Скачать