BEST Vertigo Double [12/40] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

BEST Vertigo Double [12/40] English

BEST Vertigo Double [12/40] English
English
! The appliance must be installed by a qualified person
in compliance with the instructions provided.
!
Wear gloves when carrying out installation and
maintenance operations.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Only for hoods equipped with electronic control:
The 4th speed (intensive) is automatically lowered to
3rd speed after 5 minutes of operation to optimise
energy consumption; in hoods with voltage 120V/60Hz
this function is not active and the 4th speed is indicated
by the letter b (Booster).
- If the hood is left on (lights and/or motor), after 10
hours in the absence of commands from the user, it
will automatically switch to OFF condition with all
services switched off. In hoods with voltage 120V/
60Hz this function is not active.
- The Buzzer emits a “beep” each time that a
command is set from the keyboard or remote control
(optional).
- In the event of interruption of power during the hood,
if you restore the hood in the OFF state, then the
engine must be reactivate manually.
Filtering version
The hood purifies the air and recycles the clean air
back into the room.
CONTROLS
Speed display
PU1: ON/OFF Lights
PU2: ON/OFF Motor 1
st
speed
PU3: ON/OFF Motor 2
nd
speed
PU4: ON/OFF Motor 3
rd
speed
PU5: ON/OFF Motor 4
th
speed
5’ timer function:
Pressing PU2, PU3, PU4 or PU5 for two seconds when
the motor is set to the corresponding speed, the 5’
timer function is activated. The corresponding LED
starts blinking to display this function. After five minutes
of operation the motor is turned off. If you change the
speed while the timer is running, the function is NOT
deactivated. To deactivate the function, press the blinking
key for two seconds.
Buzzer:
Each time the key is pressed, a beep is sounded.
Filter alarm:
After 30 hours of motor operation, the grease filter alarm
is activated (all the LEDs come on). The alarm is
activated when the motor is off and remains displayed for
30". To deactivate the alarm, press one of the keys for 2"
during alarm display. After 120 hours of motor operation,
the charcoal filter alarm is activated (all the LEDs blink).
The alarm is activated when the motor is off and remains
displayed for 30". To deactivate the alarm, press one of
the keys for 2" during alarm display.
MAINTENANCE
! Before cleaning or maintenance cut the power.
Cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months to
prevent the risk of fire.
EXTERNAL CLEANING: use a cloth moistened in
lukewarm water and neutral detergent (for painted
hoods); use specific products for steel, copper or brass
hoods.
INTERNAL CLEANING: use a cloth (or brush) soaked in
denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosive
products (e.g. metal sponges, brushes, too hard
brushes, very aggressive detergents, etc.)
Cleaning the grease filters
WHEN TO CLEAN IT: clean it at least every 2 months to
prevent the risk of fire.
HOW TO REMOVE THE FILTERS: push the catch near
the handle towards the rear of the hood and pull the filter
downwards
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not
in any way compromise their functioning.
Replacing the charcoal filter (P)
(for filtering version only)
WHEN TO REPLACE IT: replace it at least every 6
months.
HOW TO REMOVE IT: position the charcoal filter inside
the hood and fit the 2 filter clips (M).

Содержание

Похожие устройства

English The appliance must be installed by a qualified person in compliance with the instructions provided A Wear gloves when carrying out installation and maintenance operations If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Only for hoods equipped with electronic control The 4th speed intensive is automatically lowered to 3rd speed after 5 minutes of operation to optimise energy consumption in hoods with voltage 120V 60Hz this function is not active and the 4th speed is indicated by the letter b Booster If the hood is left on lights and or motor after 10 hours in the absence of commands from the user it will automatically switch to OFF condition with all services switched off In hoods with voltage 120V 60Hz this function is not active The Buzzer emits a beep each time that a command is set from the keyboard or remote control optional In the event of interruption of power during the hood if you restore the hood in the OFF state then the engine must be reactivate manually Filtering version The hood purifies the air and recycles the clean air back into the room CONTROLS Speed display PU1 ON OFF Lights PU2 ON OFF Motor 1s1 speed PU3 ON OFF Motor 2nd speed PU4 ON OFF Motor 3tì speed PU5 ON OFF Motor 4lh speed 5 timer function Pressing PU2 PU3 PU4 or PU5 for two seconds when the motor is set to the corresponding speed the 5 timer function is activated The corresponding LED starts blinking to display this function After five minutes of operation the motor is turned off If you change the speed while the timer is running the function is NOT deactivated To deactivate the function press the blinking key for two seconds Buzzer Each time the key is pressed a beep is sounded Filter alarm After 30 hours of motor operation the grease filter alarm is activated all the LEDs come on The alarm is activated when the motor is off and remains displayed for 30 To deactivate the alarm press one of the keys for 2 during alarm display After 120 hours of motor operation the charcoal filter alarm is activated all the LEDs blink The alarm is activated when the motor is off and remains displayed for 30 To deactivate the alarm press one of the keys for 2 during alarm display MAINTENANCE Before cleaning or maintenance cut the power Cleaning the hood WHEN TO CLEAN IT clean it at least every 2 months to prevent the risk of fire EXTERNAL CLEANING use a cloth moistened in lukewarm water and neutral detergent for painted hoods use specific products for steel copper or brass hoods INTERNAL CLEANING use a cloth or brush soaked in denatured ethyl alcohol WHAT NOT TO DO do not use abrasive or corrosive products e g metal sponges brushes too hard brushes very aggressive detergents etc Cleaning the grease filters WHEN TO CLEAN IT clean it at least every 2 months to prevent the risk of fire HQWTQ REMOVE THE FILTERS push the catch near the handle towards the rear of the hood and pull the filter downwards HOWTO CLEAN THE FILTERS hand wash or in the dishwasher using a neutral detergent If washing in the dishwasher possible discoloration of the filters does not in any way compromise their functioning Replacing the charcoal filter P for filtering version only WHEN TO REPLACE IT replace it at least every 6 months HOW TO REMOVE IT position the charcoal filter inside the hood and fit the 2 filter clips M

Скачать