Mahlkoenig EK 43 T [15/28] Before using

EK43 | EK43 S | EN

Before using

Checking grinder and scope of delivery

INFORMATION!

Risk of damage!

The grinder can become damaged if the packaging is opened careless-

ly with a sharp knife or other pointed object.

– Be very careful when opening.

1. Remove the grinder from its packaging.

2. Check if the delivery is complete (see Fig. A and B).

3. Check if the grinder or any of the individual parts are damaged.

If this is the case, do not use the grinder. Contact your supplier (see chap-

ter “Maintenance and service”).

Seng up the grinder

The grinder’s power cable (14) can be moved to any side of the

grinder and posioned between two of the feet (13) to suit the

area in which the grinder has been set up, or rather the availabil-

ity of a socket.

1. Place the grinder on a level and stable surface that does not vibrate to

prevent it from falling o.

2. Make sure that the rubber ring (16) has been properly placed in the bean

container feeder (2) and is lying at (see Fig. C and D).

3. Place the bean container (1) onto the bean container feeder.

In doing so, make sure that the pins in the bean container feeder catch

the corresponding grooves on the bean container.

4. Rotate the bean container clockwise to lock it into place on the grinder.

5. Insert the mains plug (14) into a properly installed wall socket.

6. Push the spill tray (6) into the corresponding opening under the outlet (7).