Mahlkoenig EK 43 T [17/28] Switching on the grinder and adjusting the grind

EK43 | EK43 S | EN

Switching on the grinder and adjusng the grind

• The pointer on the hand wheel (9) displays the current grind-

ing degree on the grinding degree scale (10).

The nest seng is “0” and the coarsest seng is “16”.

• Reduce the grinding degree only while the grinder is in

operation.

1. Make sure that you have inserted the power plug (14) into a properly

installed safety socket and that the sliding valve (11) encloses the bean

container (1) in the direcon of the burr assembly.

2. Press the on switch I (3) to switch on the grinder.

3. Rotate the hand wheel (9) clockwise or counterclockwise unl the

pointer displays the desired grinding degree on the grinding degree

scale (10) (see Fig. F). Turn the hand wheel towards “0” for ne coee

grinding and in the opposite direcon for coarse coee grinding.

Adding coee beans and clamping coee bag or

grounds container

1. Remove the lid of the bean container (1).

2. Pour whole roasted coee beans into the bean container from above.

The maximum lling quanty should be approx. 1 cm below the edge of

the bean container.

3. Close the bean container again with the lid.

4. Hold down the lever (5).

The bag clamp (8) rises up around the sides of the outlet (7) (see Fig. G).

5. Put a coee bag over the outlet or posion a suitable grounds container

underneath it.

• Due to its height, the EK43 S model is not designed for bag

grinding. Use a suitable grounds container instead (not included

with delivery).

• When clamping a grounds container that is made of con-

ducve material, make sure that the grounds container rests

against the contact strip (18) on the back of the outlet. This

reduces the electrostac charge of the ground coee.

6. Release the lever.

The bag clamp will close around the outlet and hold the coee bag or

grounds container.

7. Connue with the subchapter “Starng grinding".