Mahlkoenig EK 43 T [21/28] Cleaning the burr assembly

EK43 | EK43 S | EN

Cleaning the burr assembly

• The manufacturer recommends using the grinder cleaner

GRINDZ

. For more informaon about GRINDZ

visit www.mahlkoenig.de.

• The burr assembly should be cleaned every 2–5 days.

1. Make sure that the sliding valve (11) encloses the bean container (1) in

the direcon of the burr assembly.

2. Press the on switch I (3) to switch on the grinder.

3. Rotate the hand wheel (9) unl the pointer displays the coarsest grind on

the grinding degree scale (10) (see chapter “Switching on the grinder and

adjusng the grind”).

4. Pour the grinder cleaner into the bean container. Pay aenon to the

quanes indicated by the manufacturer of the grinder cleaner you are

using.

5. Place a collecng container underneath the outlet (7) to collect the

grinder cleaner.

6. Open the sliding valve to start grinding the grinder cleaner (see Fig. C

or D).

The grinding of the grinder cleaner is completed as soon as the grinder is

idling.

7. Close the bean container (1) by pushing in the sliding valve (11).

8. Remove the residue from the outlet by tapping the knocker a few mes.

9. Press the o switch 0 (4) to switch o the grinder.

10. Wipe the bean container with a dry, lint-free cloth.

11. Grind a volume of coee beans equal to the volume of grinder cleaner

used in order to remove leover cleaning parcles. Set the grind to the

desired seng during the grinding process.

12. Dispose of the ground grinding cleaner and the ground coee beans in

commercial/domesc waste.