Beko CSG 52120 GX [14/96] Gas conversion

Содержание

DANGER Before starting any work on the gas installation disconnect the gas supply n E There is the risk of explosion Gas adjustment conditions and values are stated on labels or ion type label our product is equipped for natural gas IG Natural gas installation must be prepared before installing the product If necessary interchange the sharp hose tip and the blind plug at the rear of your oven by selecting a suitable place on basis of the location of the natural gas valve Vibrations during use may cause cooking vessels to move This dangerous situation can be avoided if the product is level and balanced For your own safety please ensure the product is level by adjusting the four feet at the bottom by turning left or right and align level with the work top Final check 1 Open gas supply 2 Check gas installations for secure fitting and tightness 3 Ignite burners and check appearance of the flame B lame must be blue and have a regular hape If the flame is yellowish check if the iurner cap is seated securely or clean the lurner Gas conversion 1 2 Blind plug Hose tip There must be a flex pipe at the outlet of the installation for the natural gas connection of your product and the tip of this pipe must be closed with a blind plug Service Representative will remove the blind plug during connection and connect your product by means of a straight connection device coupling Make sure that the natural gas valve is readily accessible If you need to use your product later with a different type of gas you must consult the Authorised Service Agent for the related conversion procedure DANGER The gas hose must not be clamped bent or trapped or come into contact with hot parts of the product There is the risk of explosion due to damaged gas hose Push the product towards the kitchen wall Adjusting the feet of oven 14 EN DANGER Before starting any work on the gas installation disconnect the gas supply There is the risk of explosion In order to change your appliance s gas type change all injectors and make flame adjustment for all valves at reduced flow rate position Exchange of injector for the burners 1 Take off burner cap and burner body 2 Unscrew injectors by turning the counter clockwise 3 Fit new injectors 4 Check all connections for secure fitting and tightness S tew injectors have their position narked on their packing or injector able on Injector table page 11 can be eferred to