Beko CSG 52010 X [23/76] Removing the door inner glass

Содержание

Removing the oven door Removing the door inner glass 1 Open the front door 1 2 Open the clips at the hinge housing 2 on the right and left hand sides of the front door by pressing them down as illustrated in the figure The inner glass panel of the oven door can be removed for cleaning 1 Open the oven door 12 1 Front door 2 Hinge 3 Oven 1 Screw 2 Plastic profile 3 Inner glass pane 4 Plastic slot 2 Take out the screw 1 with a screwdriver 3 Take out the profile 2 than hold up to inner glass 3 4 Then group the door again put the glass pane 3 to the plastic slots 4 and group the profile Replacing the oven lamp 12 3 3 Move the front door to half way 4 Remove the front door by pulling it upwards to release it from the right and left hinges Steps carried out during removing process should be performed in reverse order to Install the door Do not forget to close the clips at the hinge housing when reinstalling the door DANGER Hot surfaces may cause burns Make sure that the appliance is switched off and cooled down in order to avoid the risk of an electrical shock oven lamp is a special electric light bulb J Jthat can resist up to 300 C See Technical specifications page 5 for details Oven lamps can be obtained from Authorised Service Agents Position of lamp might vary from the figure 22 EN