Rovus STEAM’N’GO [6/88] Cotton cotton

Rovus STEAM’N’GO [6/88] Cotton cotton
6
IRONING LABEL KIND OF TEXTILE FABRICS
Synthetic Acrylic
Polypropylene
Polyurethane
Synthetic Acetate
Triacetate
Synthetic Polyamide (Nylon)
Polyester
Viscose(Rayon)
Silk Silk
Wool Wool
Cotton Cotton
Linen Linen
SETTING THE TEMPERATURE

Insert the plug in the wall socket and stand the iron upright.

Turn the temperature control dial to the desired temperature setting.

The desired temperature has been reached when the pilot light has turned off. The pilot light will turn on and off from time to time, indicating that
the selected temperature is being maintained.
STEAM IRONING
This function can be used only at higher ironing temperature.

for moderate steam

or MAX for maximum steam

Fill water into the iron.

Stand the iron upright.

Connect the iron to a suitable mains supply outlet.

Turn the temperature control dial to the “

”, “

or MAX setting.

The pilot light turns off when the required temperature is reached. The iron is ready for use.

Turn the steam control knob to the required position, steam starts coming out from the holes in the sole plate.
Notice: With conventional steam ironing, water may leak from the sole plate if too low a temperature has been selected. If this happens, turn the
temperature control dial(6) to the advised position. Steam will recommence as soon as the appropriate temperature has been reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.

Fill the iron with water.

Turn the temperature control to the position “MAX”.

The pilot light turns off when the required temperature is reached.

The iron is ready for use.

Press the Burst of Steam button once.

Steam will penetrate into the garment removing the wrinkles.

Wait a few seconds before pressing the steam control knob again when there are stubborn wrinkles.
Usually all wrinkles can be removed within three pressings.
DRY IRONING

Connect the iron to a suitable mains supply outlet.

Ensure that the steam control knob is in position”0”.

Select the setting on the temperature control dial.

When the pilot light turns off, the required temperature is reached. The iron is ready for use.
CARE AND CLEANING
1. Turn the temperature control dial to “Min”, then disconnect the iron from the wall outlet and let it cool down completely.
2. Deposits and other residues on the sole plate can be removed with a cloth soaked in a vinegar/water solution.
3. The casing may the wiped with a damp cloth and then polished with a dry one.
4. Never use any abrasives to clean the sole plate.
5. Keep the sole plate smooth; avoid contact with metal objects.
STORAGE

Turn the temperature control dial to ”Min” and set the steam control knob to position”0”(=no steam).

Disconnect the iron from the wall outlet.

Pour any remaining water out of the water tank.

Stand the iron upright and let it cool down completely.

The power cord can then be round around the iron.

Always store the iron in an upright position.
SAFETY PROTECTIVE CUT-OUT
In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent the iron overheating.
Then the iron should be taken to the nearest authorized service facility.

Содержание

Похожие устройства

Скачать
Случайные обсуждения