Vitek VT-6403 BK [7/40] English

English

Switching data receipt channels

Press the CHANNEL button to switch data receipt channels from remote sensors

(Ch 1, Ch , Ch ), indoor (IN), switching on cycle displaying of temperature

data from different channels ().

Temperature change tendencies

Temperature change tendencies are displayed as arrows (growing, constant,

falling down) near the corresponding data.

Viewing minimal/maximal temperature value

At each press the MEM button the switching between displaying of the following

parameters appears:

• Current temperature

• Minimal temperature

• Maximal temperature

Reset of the minimal/maximal temperature values

Press and hold the MEM button for more than  seconds to clear memory of all

the channels

Note: during operation of the remote sensor at temperature below 0°C voltage

in the batteries can drop, thus reducing the effective radius of its emitter.

SETTING THE DATE AND THE CURRENT TIME

The base unit can display current time and the date. To switch between the cur-

rent time, date and day press the CLOCK button.

To set the current time and the date press and hold the CLOCK button for more

than  seconds. You can select time displaying format (1 hours or 4 hours),

set the current time (hours: minutes) and the date.

Use the “▼/▲” to enter the parameters. To confirm the entered parameters

press the CLOCK button.

SETTING ALARM ACTUATION TIME

To switch on the alarm mode press the ALARM button. The “AL” symbol will ap-

pear on the LCD-display. To switch on/off the alarm press the button once again

when the alarm is on, the symbol will appear on the LCD-display.

To set the alarm actuation time, press and hold the ALARM button. Digits of

hours will start flashing. Use the “▼/▲” buttons to set the actuation hour. To

confirm the setting press the ALARM button. Digits of minutes will start flashing.

6403IM.indd 7 19.03.2008 14:13:46