Hama EWS-860 WHITE [7/115] Connection to the measuring station

5.1. Base station

• Use the base to position the base station on alevel surface. (C)

5.2. Measuring station

• Youcan fasten the measuring station horizontally or vertically to an outer wall using a

mounting plate (26).

• If you want to mount the measuring station horizontally,use rawl plugs, screws, etc. to

fasten the mounting plate (26) using the central cut-out (28) to the wall intended for

installation.

• If you want to mount the measuring station vertically,use rawl plugs, screws, etc. in the

wall intended for installation and hang the mounting plate (26) using cut-out (27).

• Gently push the measuring station until you hear alatching sound (“click”) as it engages

with the clips (29).

6. Operation

Note –Input

Hold down the - button (18) or the - button (19) to select the values faster.

6.1. Connection to the measuring station

• After you insert the batteries, the base station automatically searches for aconnection to

the measuring station and performs initial setup.

Note

• Initial setup takes approx. 3minutes.

• During connection, the wireless symbol on the measuring station will ash (3).

• Do not press any buttons during setup. Otherwise, values may not be transmitted

correctly and thereisarisk of value errors and inaccuracies.

• The setup process is completed when the indoor (18, 14) and outdoor (6, 16)

measurement data is displayed.

• If the base station still does not receive asignal from the measuring station, press and hold

the -button (19) for approx. 3seconds to start the manual search for the signal.