Melitta Caffeo Solo E 950-101 [21/204] Integrated descaling programme

Melitta Caffeo Solo E 950-101 [21/204] Integrated descaling programme
21
EN
Cleaning phase 2 ( ):
When illuminates, proceed as follows:
Fill the water reservoir with tap water up
to the max. mark.
• Press outlet 2 all the way down.
• Press the
button to continue with
the cleaning programme (takes about 5
minutes).
Cleaning phase 3 (
):
When
illuminates, proceed as follows:
Empty the drip tray and coffee grounds
container.
Insert the drip tray without the coffee
grounds container
Place the coffee grounds container
under outlet 2.
Cleaning phase 4 (
, the middle
bean is ashing):
The cleaning programme will be
continued again and takes about 5
minutes.
When
illuminates, proceed as follows:
Empty the drip tray and coffee grounds
container and insert them in the
appliance as usual.
The cleaning programme is nished.
Integrated descaling programme
Warning!
The descaling agent can cause skin
irritations
Comply with the safety instructions
and the dosing information speci ed
on the descaling agent packaging.
The integrated descaling programme
(takes about 30 minutes) removes lime
residues inside the appliance. The symbol
for descaling
ashes during the entire
process.
The descaling programme should be
performed every 3 months, however, at
the latest when
illuminates („Setting
the water hardness“, page 19).
Only use Melitta
®
ANTI CALC.
Switch off the appliance.
Remove the water lter if necessary
(„Water hardness and lter“, page 18).
• Press the
and buttons
simultaneously for approx. 3 seconds.
ashes, illuminates.
Empty and insert the drip tray.
illuminates.
Completely empty the water reservoir.
Add the descaling agent to the water
reservoir according to the instructions on
the packaging.
Insert the water reservoir.
• Press the
button to start the
descaling programme (takes about 15
minutes).
BA_Solo_042015.indd 21BA_Solo_042015.indd 21 20.04.2015 21:30:4620.04.2015 21:30:46

Содержание

Похожие устройства