Home
Главная
Vitek
Чайник
VT-1167
Инструкция по эксплуатации Страница: 4

Vitek VT-1167 [4/44] English

ENGLISH

• Do not repair the unit by yourself. If you find

any damages, unplug the unit and apply to

the authorized service center.

THE UNIT IS INTENDED FOR HOUSEHOLD

USAGE ONLY.

Before the first usage

• Unpack the kettle.

• Make sure that operating voltage of the unit

corresponds to voltage of your mains.

Note: After unit transportation or storage at

low temperature it is necessary to keep it for

at least two hours at room temperature before

switching on.

• Insert the power cord plug into the socket,

you will hear a sound signal and the display

(4) will switch on, water level scale (11) and

control buttons (5-8) illumination will flash,

and the current temperature inside the kettle

will be indicated on the display.

• To fill the kettle with water take it off the base

(12), open the lid (2) by pressing lid opening

button (3).

• Fill the kettle with water till the max. mark on

the water level scale (11), close the lid, place

the kettle on the base (12). Make sure that the

lid (2) is closed tightly.

• Switch on the kettle by pressing the (7) but-

ton, the button and water level scale illumina-

tion will switch on.

• When water starts boiling, the kettle will

switch off automatically, you will hear 5 sound

signals, the water level scale illumination will

go out. Pour out water and repeat boiling pro-

cedure 2-3 times.

Note:

• When using the kettle, make sure that the lid

(2) is closed tightly.

• Before removing the kettle from the base

make sure that it is switched off.

Kettle usage

Avoid dropping or hitting of kettle, especially

when filling it with water.

Note: Cord storage (13) is on the reverse side

of the base (12). You can adjust the power cord

length, winding it over cord storage in corre-

sponding way.

• Insert the power cord plug into the socket,

you will hear a sound signal and the display

(4) will switch on, water level scale (11) and

control buttons (5-8) illumination will flash,

and the current temperature inside the kettle

will be indicated on the display.

• To fill the kettle with water take it off the base

(12), open the lid (2), by pressing the lid

opening button (3).

• Place the filled kettle on the base (12) as

convenient for you, as it allows unit 360°

rotation.

• Switch on the kettle by pressing the (7) but-

ton, the button and water level scale (11) illu-

mination will switch on.

• The color of water level scale (11) illumina-

tion will change according to water tem-

perature.

Temperature °С Color

20° Green

30° Green

40° Light blue

50° Light blue

60° Blue

70° Blue

80° Purple

90° Red

• When water starts boiling, the kettle will

switch off automatically, you will hear 5

sound signals, the water level scale illumina-

tion will go out.

“Heating to a preset temperature” function

(6)

This function allows to select required water

temperature for making different tea varieties.

• Pressing the button “ ” (6) you can set the

required water heating temperature (20, 30,

40, 50, 60, 70, 80 or 90°С), the button and

water level scale illumination will switch on

• The current and preset temperature will be

indicated on the display.

• When the preset temperature is reached,

you will hear a short sound signal, the con-

trol button and water level scale illumination

will go out.

Note: If you fill the kettle with cold water and

select the mode of water heating to 20 degrees,

the water temperature will eventually reach the

room temperature, if the room temperature is

above 20 degrees. In this case this mode will

not operate.

VT-1167 IM.indd 4 04.04.2012 12:53:40

Vitek VT-1167 [4/44] English

Содержание

Похожие устройства