Hikvision DS-2AF1-401 [6/51] Safety instruction

User Manual of 4-inch High Speed Dome

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or

property loss. The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings:

Follow these safeguards to prevent

serious injury or death.

Cautions:

Follow these precautions to

prevent potential injury or

material damage.

Warnings

 In the use of the product, you must be strict compliance with the electrical safety regulations of

the nation and region.

 Please use the power adapter, which is provided by normal company. The standard of the power

adapter is AC24V/2A.

 Do not connect several devices to one power adapter as adapter overload may cause over-heat

or fire hazard.

 Please make sure that the plug is firmly connected on the power socket.

 When the product is installed on wall or ceiling, the device shall be firmly fixed.

 If smoke, odors or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

 If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Cautions

 Do not drop the dome or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places

subject to shock (ignorance can cause equipment damage).

 Do not place the dome in extremely hot, cold (the operating temperature shall be -30°C ~ +65°C),

dusty or damp locations, or fire or electrical shock will occur otherwise.

 The dome cover for indoor use shall be kept from rain and moisture.

 Exposing the equipment to direct sun light, low ventilation or heat source such as heater or

radiator is forbidden (ignorance can cause fire danger).

 Do not aim the camera at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of CCD at the

same time.