Axis P1347 [23/66] Axis p1346 e axis p1347 e video audio

AXIS P1346/-E/AXIS P1347/-E - Video & Audio

Select the required Sample rate (number of times per second the sound is sampled). The higher the sample rate, the better the

audio quality.

Changing the Bit rate changes the audio compression level and hence audio quality. A higher bit rate can improve audio

quality but requires more bandwidth.

The network camera can be configured to trigger an event if the incoming sound level rises above, falls below, or passes the

set Alarm level.

Audio Output

If the sound from the speaker is too low or too high, adjust the output gain for the active speaker attached to the network

camera.

When satisfied with the settings, click Save, or click Reset to revert to previously saved settings.

Note:

To receive synchronized video in H.264 and audio, it is recommended that the time settings in the camera and client

computer are synchronized with an NTP Server. This is enabled in the camera under System Options > Date & Time.

Please refer to the help pages for more information.

Click to access the online help

Audio Clips

Audio clips can be played when an event occurs or manually from the Live View page. Audio clips are created either by

recording sound using the camera's microphone or by uploading a sound file to the camera. Audio clips that have been added

to the network camera are listed in the Audio Clip List page. You can add new clips, play, download, modify and remove clips.

Refer to the online help for further information.