Clatronic BS 1276 [31/46] Купить в интернет магазине http clatronic shop com ua
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Clatronic BS 1276 [31/46] Купить в интернет магазине http clatronic shop com ua

Clatronic BS 1276 [31/46] Купить в интернет магазине http clatronic shop com ua
31
ENGLISH
Ill. 2
• Hold the dust bag over a rub-
bish bin. Empty the contents
of the dust bag. In order to do
this, press the button (PUSH)
on the dust bag (see Fig. 2).
• Close the base plate again
so that it is heard to lock into
place.
Ill. 3
Ill. 4
HEPA Motor Protective Filter
(in the Dust Container)
Cleaning the Filter Element
• Remove the mains plug from
the socket.
• Push the button for releasing
the dust bag downwards and
remove the dust bag (see
Fig. 1).
• Empty the contents of the dust
bag (see illustration 2).
• Unlock the lter element by
turning briey in the direction of
UNLOCK. Then take it out (see
Figure 3). In the second step
separate the nylon pre-lter (4)
from the HEPA lter (3) by
turning against the lock .
(see Fig. 4). Clean the nylon
pre-lter by tapping out the
contents and the HEPA lter
by gently brushing out.
• Now replace the components.
• Lock the lter element in the
dust bag by turning it as far as
will go in the direction of LOCK.
• Attach the dust container again
by locking it in position
Ill. 5
Every third time the dust container
is emptied, or in the case of severe
soiling, clean the lter by allowing
water to ow through the lter fabric
against the direction in which the
vacuum cleaner blows. The dust
container should only be reinserted
when it is completely dry!
CAUTION:
Never wash the lter in the
washing machine, and please
do not use a hairdryer to dry it.
Outlet lter
The appliance is also equipped with an outlet lter. This lter can
be found under the lter cover (13). In order to ensure that the
lter works correctly, we recommend that you replace it every
six months.
• Remove the mains plug from the socket.
• Open the ventilation grille by pressing the lever on its side.
• Then pull the grille out towards the front. Remove the lter
and clean as described above.
• Please reinsert the lter correctly and close the air outlet
grille (until it locks into place)
CAUTION: Important note!
Cleaning may become necessary after a shorter time, depen-
ding on the conditions of use, e.g. when vacuuming ne dust.
If the suction power of your vacuum cleaner diminishes please
clean the lters as described.
If the suction power suddenly diminishes during operation this
may be due to the lters being locked.
Cleaning & maintenance
AVVISO:
• Always remove the mains lead before cleaning!
• Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might result
in an electric shock or re.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the casing with a dry cloth.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Please insert the hook of the oor nozzle into the parking
assistant on the rear of the device.
Troubleshooting
• The Device Does Not Work.
Remedy:
Check the connection to the mains.
Check the position of the switch.
• The device does not suck up anything.
Possible Cause:
The suction power is set too low.
Remedy:
Check the position of the control switch.
or
05-BS 1276.indd 31 08.10.2009 14:19:53 Uhr
Пылесос CLATRONIC BS 1276
Купить в интернет-магазине http://clatronic-shop.com.ua

Содержание

Похожие устройства

Скачать