Chicago Pneumatic CP772HK-Metric [5/34] Safety instructions

SAFETY INSTRUCTIONS

To reduce risk of injury, everyone using, installing, repairing,

maintaining, changing accessories on, or working near this tool must

read and understand these instructions before performing any such

task.

DO NOT DISCARD - GIVE TO USER

The goal of Chicago Pneumatic is to produce tools that help

you work safely and efficiently. The most important safety

device for this or any tool is YOU. Your care and good

judgment are the best protection against injury. All possible

hazards cannot be covered here, but we have tried to

highlight some of the important ones.

For Additional Safety Information Consult:

! Your employer union and/or trade association.

! US Department of Labor (OSHA); www.osha.gov; Council

of the European Communities europe.osha.eu.int.

! “Safety Code For Portable Air Tools” (B186.1) available

from: www.ansi.com

! “Safety Requirement For Hand-Held Non-Electric Power

Tools” available from: European Committee for

Standardization, www.cenorm.be

Air Supply And Connection Hazards

! Air under pressure can cause severe injury.

! Always shut off air supply, drain hose of air pressure and

disconnect tool from air supply when not in use, before

changing accessories or when making repairs.

! Never direct air at yourself or anyone else.

! Whipping hoses can cause serious injury. Always check for

damaged or loose hoses and fittings.

! Do not use quick disconnect couplings at tool. See

instructions for correct set-up.

! Whenever universal twist couplings are used, lock pins

must be installed.

! Do not exceed maximum air pressure of 90 psi (6.2 bar) or

as stated on tool nameplate.

Entanglement Hazards

! Keep away from rotating drive.

! Do not wear jewelry or loose clothing.

! Choking can occur if neckwear is not kept away from tool

and accessories.

! Scalping can occur if hair is not kept away from tool and

accessories.

! Avoid direct contact with accessories during and after use.

Gloves will reduce the risk of cuts or burns.

! Use only proper accessory retainers (see parts list). Use

deep sockets wherever possible.

Projectile Hazards

! Always wear impact-resistant eye and face protection when

involved with or near the operation, repair or maintenance

of the tool or changing accessories on the tool.

! Be sure all others in the area are wearing impact-resistant

eye and face protection.

! Even small projectiles can injure eyes and cause blindness.

! Use only impact wrench sockets and accessories in good

condition. Sockets in poor condition or hand sockets and

accessories used with impact wrenches can shatter.

! Always use the simplest hook-up possible. Long, springy

extension bars and adapters absorb impact power and

could break. Use deep sockets wherever possible.

! Never operate the tool off of the work. It may run too fast

and cause the accessory to be thrown off the tool.

! Serious injury can result from over-torqued or under-

torqued fasteners, which can break, or loosen and

separate. Released assemblies can become projectiles.

Assemblies requiring a specific torque must be checked

using a torque meter.

Note: So-called "click" torque wrenches do not check for

potentially dangerous over-torque conditions.

Workplace Hazards

! Slip/Trip/Fall is a major cause of serious injury or death.

Beware of excess hose left on the walking or work surface.

! High sound levels can cause permanent hearing loss. Use

hearing protection as recommended by your employer or

OSHA regulation (see 29 CFR part 1910).

! Maintain a balanced body position and secure footing.

! Be in control of the throttle at all times. Do not get caught

between the tool and the work.

! Repetitive work motions, awkward positions and exposure

to vibration can be harmful to hands and arms. If

numbness, tingling, pain or whitening of the skin occurs,

stop using the tool and consult a physician.

! Avoid inhaling dust or handling debris from the work

process which can be harmful to your health. Use dust

extraction and wear respiratory protective equipment when

working with materials which produce airborne particles.

! Proceed with care in unfamiliar surroundings. Be aware of

potential hazards created by your work activity. This tool is

not insulated for coming into contact with electric power

sources.

! Some dust created by power sanding, sawing, grinding,

drilling and other construction activities contains chemicals

known to the State of California to cause cancer and birth

defects or other reproductive harm. Some examples of

these chemicals are:

- Lead from lead based paints

- Crystalline silica bricks and cement and other masonry

products

- And Arsenic and chromium from chemically-treated

rubber

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work

with approved safety equipment, such as dust masks that

are specially designed to filter out microscopic particles.

Additional Safety Topics

! This tool and its accessories must not be modified.

! This tool is not recommended for use in explosive

atmospheres.

! Operators and maintenance personnel must be physically

able to handle the bulk, weight and power of the tool.

! For professional use only.

Содержание

Похожие устройства

A WARNING To reduce risk of injury everyone using installing repairing maintaining changing accessories on or working near this tool must read and understand these instructions before performing any such task The goal of Chicago Pneumatic is to produce tools that help you work safely and efficiently The most important safety device for this or any tool is YOU Your care and good judgment are the best protection against injury All possible hazards cannot be covered here but we have tried to highlight some of the important ones A Never operate the tool off of the work It may run too fast and cause the accessory to be thrown off the tool A Serious injury can result from over torqued or under torqued fasteners which can break or loosen and separate Released assemblies can become projectiles Assemblies requiring a specific torque must be checked using a torque meter Note So called click torque wrenches do not check for potentially dangerous over torque conditions For Additional Safety Information Consult A Your employer union and or trade association A US Department of Labor OSHA www osha gov Council of the European Communities europe osha eu int A Safety Code For Portable Air Tools B186 1 available from www ansi com A Safety Requirement For Hand Held Non Electric Power Tools available from European Committee for Standardization www cenorm be Air Supply And Connection Hazards A Air under pressure can cause severe injury A Always shut off air supply drain hose of air pressure and A A disconnect tool from air supply when not in use before changing accessories or when making repairs Never direct air at yourself or anyone else Whipping hoses can cause serious injury Always check for Workplace Hazards A A A A A A damaged or loose hoses and fittings A Do not use quick disconnect couplings at tool See instructions for correct set up A Whenever universal twist couplings are used lock pins A must be installed A Do not exceed maximum air pressure of 90 psi 6 2 bar or as stated on tool nameplate Entanglement Hazards A Keep away from rotating drive A Do not wear jewelry or loose clothing A Choking can occur if neckwear is not kept away from tool and accessories A Scalping can occur if hair is not kept away from tool and accessories A Avoid direct contact with accessories during and after use Gloves will reduce the risk of cuts or bums A Use only proper accessory retainers see parts list Use deep sockets wherever possible Projectile Hazards A Always wear impact resistant eye and face protection when involved with or near the operation repair or maintenance A Slip Trip FaII is a major cause of serious injury or death Beware of excess hose left on the walking or work surface High sound levels can cause permanent hearing loss Use hearing protection as recommended by your employer or OSHA regulation see 29 CFR part 1910 Maintain a balanced body position and secure footing Be in control of the throttle at all times Do not get caught between the tool and the work Repetitive work motions awkward positions and exposure to vibration can be harmful to hands and arms If numbness tingling pain or whitening of the skin occurs stop using the tool and consult a physician Avoid inhaling dust or handling debris from the work process which can be harmful to your health Use dust extraction and wear respiratory protective equipment when working with materials which produce airborne particles Proceed with care in unfamiliar surroundings Be aware of potential hazards created by your work activity This tool is not insulated for coming into contact with electric power sources Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints Crystalline silica bricks and cement and other masonry products And Arsenic and chromium from chemically treated rubber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles of the tool orchanging accessories on the tool A Be sure all others in the area are wearing impact resistant A A A eye and face protection Even small projectilescan injure eyes and cause blindness Use only impact wrench sockets and accessories in good condition Sockets in poor condition or hand sockets and accessories used with impact wrenches can shatter Always use the simplest hook up possible Long springy extension bars and adapters absorb impact power and could break Use deep sockets wherever possible 2 Additional Safety Topics A This tool and its accessories must not be modified A This tool is not recommended for use in explosive atmospheres A Operators and maintenance personnel must be physically able to handle the bulk weight and power of the tool A For professional use only SAFETY INSTRUCTIONS DO NOT DISCARD GIVE TO USER

Скачать