Beko M 6604 CTW [38/64] Part 4 operating the top burners

Содержание

H Part 4 Operating the top burners To obtain maximum Use of top gas burners efficiency Turn the relevant knob by slightly pressing A correct use to burner results in gas in counter clockwise direction saving and better out put Therefore The large flame on the knob corresponds we recommend to use saucepans to maximum capacity position and the whose base completely cover the small flame corresponds to minimum flames Four saucepans with much capacity position smaller diameters to be put auxiliary Ignition by button In models with ignition burner use the pan support adaptor If your cooker has flame failure device on gas burners Flame failure device It provides automatic ignition When the button is pressed and released all plugs spark at the same time The ignition starts at the burner through which the gas flows If an ignition In case of any flame does not occur repeat the same action Holding failures with any reasons the button at pressed position does not provide in the top burners the ignition flame failure device Ignition from the knob In models with ignition immediately cuts of the gas flow It is also a safety device You should turn the knob to counter clockwise for the wrong use of the children You direction by pressing The spark occurs itself should turn the knob to the counter immediately on the burners till you take your hand clockwise direction by pressing You off the knobs should ignite by pressing the knob and After you release the knob if the ignition does not wait for its ignition You should keep continue repeat the same process by keeping the the knob at pressed position for 3 5 knob pressed for 15 seconds If still no ignrton occurs wait for 1 minute and repeat again Warning Do not keep the knob in pressed position more than 15 seconds seconds after you see the flame around the burner Repeat the sequence of operations if the flame does not continues 7