Tp-Link TL-R600VPN [31/82] Mac clone

SafeStream

Gigabit Broadband VPN Router User GuideTL-R600VPN

Server and DMZ Host may change accordingly at the same time; you’d better

re-configure it as well.

4.3.3 MAC Clone

Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the

screen below (shown in Figure 4-11).

Some ISPs require that you register the MAC address of your adapter, which is connected to your

cable, DSL modem or Ethernet during installation. You do not generally need to change anything

here.

Figure 4-11

¾ WAN MAC Address - This field displays the current MAC address of the WAN port, which is

used for the WAN port. If your ISP requires that you register the MAC address, please enter

the correct MAC address into this field. The format for the MAC address is

XX-XX-XX-XX-XX-XX (for example: 00-0A-EB- E6-B9-49).

¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing

the router. If the MAC address is required, you can click the Clone MAC Address button

and this MAC address will fill in the “WAN MAC Address” field.

)

Note:

1) Click Restore Factory MAC to restore the MAC address of WAN port to the factory

default value.

2) Only the PC(s) on your LAN can use the MAC Address Clone feature.

3) After you finish the configuration, click the Save button, and the router will prompt you to

reboot.