Tp-Link TL-PA211 Инструкция по эксплуатации онлайн [26/27] 16576

TL-PA211

AV200 Mini Powerline Adapter

Join an existing Powerline AV Network:

Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants

to join this network.

Step 1. Press and hold the Pair button on Powerline adapter C for 3 to 8 seconds.

Step 2. Press and hold the Pair button on Powerline adapter A/B for 3 to 8 seconds.

(This step must be taken within 120 seconds after step 1 is finished.)

Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on

Powerline adapter A/B and C will stop flashing and become solid light when the connection is

made.

 Note:

The sequence of Step 1 and Step 2 can be exchanged.

Leave an existing Powerline AV Network:

As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The

user wants to remove one device (Powerline adapter A) from this network.

Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline

adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily

extinguish during resetting, flash during restarting then illuminate steadily.)

Step 2. Wait for the reset to complete.