D-Link DES-3225G [81/199] Configure slot2 module

24-port NWay Ethernet Switch User’s Guide

Using the Console Interface 67

7. In the first Broadcast Storm field, Rising Action, select

from Do Nothing, Blocking, or Blocking-Trap. Blocking

means only multicast and unicast packets can enter this

port. Blocking-Trap means only multicast and unicast

packets can enter this port and a trap will be sent. The upper

threshold for a Rising Action is 20%--this is the utilization

of the port’s bandwidth.

8. In the second Broadcast Storm field, Falling Action,

select from Do Nothing, Forwarding, or Forwarding-Trap.

Forwarding means broadcast packets will be sent to other

ports. Forwarding-Trap means broadcast packets will be sent

to other ports and a trap will be sent. The lower threshold for

a Falling Action is 10%--this is the utilization of the port’s

bandwidth.

9. Press CTRL+S to let the changes take effect.

STP Port State and Status reflect the current conditions of the

port. They are read-only fields and cannot be changed.

Configure Slot2 Module

This screen allows you to change the port state of the optional

1000BASE-SX module in slot 2. This is useful in the case when you

would like to partition a port due to excessive collision, or for

observation, device repair, or security reasons. Great caution,

however, must be observed when partitioning a port; you should

make sure that the partitioned port is not being used as the port to

control or monitor the condition of other devices.

To change the configuration of a port:

1. Select Configuration from the main menu and then choose

Configure Slot2 Module. The following screen appears:

Удалено: Using the Console

Interface