D-Link DI-724P+ Инструкция по эксплуатации онлайн [82/102] 40977

Step 8 Click Apply. When prompted, click Continue. Once the screen refreshes,

unplug the power to the D-Link router.

Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem

has established a link to your ISP, plug the power back into the D-Link router. Wait

about 30 seconds and log back into the router.

Step 10 Click on the Status tab in the web conguration where you can view the

device info. Under WAN, click Connect. Click Continue when prompted. You should

now see that the device info will show an IP Address, verifying that the device has

connected to a server and has been assigned an IP Address.

How can I setup my router to work with Earthlink DSL or any PPPoE

connection? (continued)

Frequently Asked Questions (continued)

Can I use my D-Link Broadband Router to share my Internet connection

provided by AOL DSL Plus?

In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the

client software. If this is the case, then our routers will work with this service. Please

contact AOL if you are not sure.

To set up your router:

Step 1 Log into the web-based conguration (192.168.0.1) and congure the WAN

side to use PPPoE.

Step 2 Enter your screen name followed by @aol.com for the user name. Enter

your AOL password in the password box.

Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything

higher than 1400.

Step 4 Apply settings.

Step 5 Recycle the power to the modem for 1 minute and then recycle power to the

router. Allow 1 to 2 minutes to connect.

If you connect to the Internet with a different internet service provider and want

to use the AOL software, you can do that without conguring the router’s rewall

settings. You need to congure the AOL software to connect using TCP/IP.

Go to http://www.aol.com for more specic conguration information of their software.