D-Link DI-724P+ Инструкция по эксплуатации онлайн [83/102] 40977

Frequently Asked Questions (continued)

How do I open ports on my router?

To allow trafc from the internet to enter your local network, you will need to open up

ports or the router will block the request.

Step 1 Open your web

browser and enter the IP

Address of your D-Link router

(192.168.0.1). Enter username

(admin) and your password

(blank by default).

Step 2 Click on Advanced

on top and then click Virtual

Server on the left side.

Step 3 Check Enabled to

activate entry.

Step 4 Enter a name for your virtual server entry.

Step 5 Next to Private IP, enter the IP Address of the computer on your local

network that you want to allow the incoming service to.

Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select

both.

Step 7 Enter the port information next to Private Port and Public Port. The private

and public ports are usually the same. The public port is the port seen from the WAN

side, and the private port is the port being used by the application on the computer

within your local network.

Step 8 Enter the Schedule information.

Step 9 Click Apply and then click Continue.

Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual

Server entries.

Because our routers use NAT (Network Address Translation), you can only open a

specic port to one computer at a time. For example: If you have 2 web servers on

your network, you cannot open port 80 to both computers. You will need to congure

1 of the web servers to use port 81. Now you can open port 80 to the rst computer

and then open port 81 to the other computer.