D-Link DWL-810+ [12/29] Web configuration

5. Web Configuration

Before using the Web Configuration for the DWL-810+, please consider the

following:

Factory Default Settings for the DWL-810+

Operating Mode Infrastructure

SSID default

Channel 6

Transmission rates Auto

Encryption No

Administrator password Blank (no password needed)

IP Address mode Static

IP Address 192.168.0.30

IP Subnet 255.255.255.0

username admin (all lower case)

You will need a JavaScript-enabled web-browser such as the Internet

Explorer 6.0 or later, or the Netscape Navigator 6.0 or later.

The computer that you are using for initial configuration must have

an IP Address within the same range as the IP Address of the DWL-

810+. The DWL-810+ has a default IP Address of 192.168.0.30 with a

subnet mask of 255.255.255.0

You will need to assign a Static IP Address to the computer that you are

using to configure the DWL-810+, within the IP Address Range of the

DWL-810+. For example, you can assign a Static IP address of

192.168.0.2 with a subnet mask of 255.255.255.0 (Please refer to the

Appendix section of the Quick Installation Guide.)