Tuttnauer 3870 EHS (HSG-WS) Инструкция по эксплуатации онлайн [39/58] 387790

5.3 DPU 30 Printer Handling

5.3.1 Setting Paper

If the autoclave is equipped with A DPU 30 printer, follow the

instructions in this paragraph.

1. Press the paper cover open button, and open the paper cover.

Handle the paper cutter carefully not to cut your hand.

2. Set a paper roll as shown in the figure.

3. Close the paper cover by pressing both ends of the cover

with the tip end of the paper emerging from the cutter.

5.3.2 Maintenance

1. Wipe off the soiling on the printer surface with a dry soft

cloth with a weak neutral detergent. After that, wipe the

printer with a dry cloth.

2. Caution: Never disassemble the printer. Failure to follow

this instruction may cause overheating or burning of the

printer or the AC adapter. Or an electric shock, which may

lead to fires or accidents.

3. Never use the printer in a place of extreme humidity or any

place where it can possibly be splashed by any liquids. If

any liquids get into the printer, it could lead to fire, electric

shock, or other serious accidents.

4. Never touch the thermal head immediately after printing

because it becomes very hot. Make sure that the thermal

head is cool before setting papers or cleaning the thermal

head.

5. Power OFF the printer in any of the following cases:

1. The printer does not recover from an error.

2. Smoke, strange noise or smells erupt from the printer.

3. A piece of metal or any liquid touches the internal parts

or slot of the printer.

6. Notes on treatment of thermal papers:

1. Store the papers in a dry, cool and dark place.

2. Do not rub the papers with hard substance.

3. Keep the papers away from organic solvent.