Tuttnauer 3870 EHS (HSG-WS) Инструкция по эксплуатации онлайн [9/58] 387790

The Jacketed chamber:

This autoclave has a jacketed stainless steel chamber. The space

between the walls of the chamber and jacket is used to generate and

provide the steam required by the autoclave. The heating elements are

located inside this cavity as is the mineral free water supplied by the

reservoir. Steam is produced and maintained here as long as the unit is

turned on, thereby eliminating waiting time and making possible steam

on demand.

This autoclave’s reservoir is divided into two compartments:

The front compartment is for supplying the steam generator with

mineral free water. It is replenished from a mineral free water source

and is maintained automatically by high and low sensors and a computer

controlled solenoid valve.

The rear compartment is for supplying the liquid ring vacuum pump

with tap water. It is replenished from a tap water source and is

maintained automatically by high and low sensors and a computer

controlled solenoid valve.

Printer option:

This autoclave can be equipped with an optional printer that prints the

preset and actual parameters of each cycle (temperature, pressure and

vacuum with respect to time).

Computer interface:

An outstanding feature of this autoclave is the communication system.

This system allows interfacing with a personal computer for control and

monitoring of the autoclave by means of a special software program.

This communication system also enables the transmission of data from

the autoclave through a modem - to a remote center for data logging or

subsequent processing.

This manual is intended for the user. It gives the user a general

understanding of the instrument and the best ways to operate and take

care of it, in order to obtain optimum effective results.

After reading this manual, operating and maintaining the autoclave will

be simple and easy. However since this instrument is built with high

technology sensitive components, no attempt should be made by the

user or any other unauthorized person to repair or recalibrate it.

Only technical personnel having proper qualifications and holding

technical documentation (including a technician manual) and adequate

information are authorized to service the apparatus.