Tp-Link Archer MR200 V2 [50/93] 1 change the lan ip address

Chapter 11

Specify Your Network Settings

3. Enable Data Limit to set total/monthly data allowance and usage alert to prevent

data overuse.

4. Enter the allowed amount of total/monthly data in the Total/Monthly Allowance field.

When data usage exceeds the allowed level, the router will disconnect from the

internet and notify you on the Basic > Network Map Page.

5. Enter a percentage in the Usage Alert field to prevent data overuse. When data

usage reaches the alert level, a warning will be shown on the Basic > Network Map

Page.

6. Enable Data Statistics to reset data statistics when the next billing cycle starts.

7. Enter the start date of the billing cycle in the Start Date field.

8. Click Save to save the settings.

11. 4. LAN Settings

11. 4. 1. Change the LAN IP Address

The router is preset with a default LAN IP 192.168.1.1, which you can use to log in to

its web-based management page. The LAN IP address together with the Subnet Mask

also defines the subnet that the connected devices are on. If the IP address conflicts

with another device on your local network or your network requires a specific IP subnet,

you can change it.

Follow the steps below to change your IP address.

1. Visit http://tplinkmodem.net, and log in with the password you set for the router.

2. Go to Advanced > Network > LAN Settings page.

3. Type in a new IP Address as needed.

4. Select the Subnet Mask from the drop-down list. The subnet mask together with

the IP address identifies the local IP subnet.