Tp-Link Archer MR200 V2 [60/93] Set up a dynamic dns service account

Chapter 11

Specify Your Network Settings

• WDS - Select this checkbox to enable the WDS (Wireless Distribution System) Bridging

feature to allow the router to bridge with another access point (AP) in a wireless local

area network (WLAN). Refer to FAQ for detailed instructions.

11. 6. Set Up a Dynamic DNS Service Account

Most ISPs (internet service providers) assign a dynamic IP address to the router and

you can use this IP address to access your router remotely. However, the IP address

can change any time and you don’t know when it changes. In this case, you might need

the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your

friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in

no need of checking and remembering the IP address.

Note:

DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.

To set up DDNS, please follow the instructions below:

1. Visit http://tplinkmodem.net, and log in with the password you set for the router.

2. Go to Advanced > Network> Dynamic DNS.

3. Select the DDNS service provider (Dyndns or NO-IP). If you don’t have a DDNS

account, select a service provider and click Go to register.

4. Enter the username, password and domain name of the account (such as lisa.ddns.

net).

5. Click Login and Save.

Tips:

If you want to use a new DDNS account, please log out first, then log in with the new account.

11. 7. Create Static Routes

A static route is a pre-determined path that network information must travel to reach

a specific host or network. Data from one point to another will always follow the same