Tp-Link TX-VG1530 V1 [20/135] Tcp ip configuration

TX-VG1530

N300 Wireless VoIP GPON Router User Guide

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your TX-VG1530 N300 Wireless

VoIP GPON Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default IP address of the TX-VG1530 N300 Wireless VoIP GPON Router is 192.168.1.1. And

the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this

guide, we use all the default values for description.

Connect the local PC to the LAN/WAN port of the GPON router. And then you can configure the IP

address for your PC in the following way.

 Obtain an IP address automatically

1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.

If you need instructions as to how to do this, please refer to T3 in

Appendix B:

Troubleshooting.

2) Then the built-in DHCP server will assign IP address for the PC.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the Start menu on your desktop, select run tab, type cmd or command in the field

and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the

router has been established.

Figure 3-1

If the result displayed is similar to the screen shown below, it means that your PC has not

connected to the router.

Figure 3-2