Tp-Link TX-6610 V1 [23/32] Management

TX-6610 1-Port Gigabit GPON Terminal User Guide

Click Save to make the settings take effect.

GPON SN

¾ Old SN: Displays the factory default SN.

¾ New SN: Enter the SN provided by your ISP.

Click Save to make the settings take effect.

4.5 Management

Choose menu “Management”, and you will see the submenus under the main menu: User

management, Firmware Upgrade, Factory Defaults and Reboot. Click any one of them, and

you will be able to configure the corresponding function. The detailed explanations for each

submenu are provided below.

4.5.1 User Management

Choose menu “Management” Æ “User Management”, and then you can change the factory

default user name and password of the ONT in the next screen as shown in Figure 4-7. TX-6610

provides two users: admin/admin and user/user. Both can be used to log in the management

page.

Figure 4-7

It is strongly recommended that you should change the factory default user name and password of

the ONT, because all users who try to access the ONT's Web-based utility will be prompted for the

ONT's default user name and password.

) Note:

1) The new user name and password cannot exceed 14 characters in length and not include any

spaces. Enter the new Password twice to confirm it.

2) If you use the “user” to log in the ONT’s management page, only the Status and Statistics

page will you see, as shown in Figure 4-8.