![Hikoki G 15VA [3/164] English](/img/pdf.png)
Hikoki G 15VA [3/164] English
![Hikoki G15VANSZ [3/164] English](/views2/1471505/page3/bg3.png)
3
English
SAFETY WARNINGS COMMON FOR
GRINDING OR ABRASIVE CUTTING-
OFF OPERATIONS
a) This power tool is intended to function as a
grinder or cut-off tool. Read all safety warnings,
instructions, illustrations and specifi cations
provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
b) Operations such as sanding, wire brushing or
polishing are not recommended to be performed
with this power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
c)
Do not use accessories which are not specifi cally
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
d)
The rated speed of the accessory must be at least equal
to the maximum speed marked on the power tool.
Accessories running faster than their rated speed can
break and fl y apart.
e) The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool.
Incorrectly sized accessories cannot be adequately
guarded or controlled.
f) Threaded mounting of accessories must match the
grinder spindle thread. For accessories mounted
by fl anges, the arbour hole of the accessory must
fi t the locating diameter of the fl ange.
Accessories that do not match the mounting hardware of
the power tool will run out of balance, vibrate excessively
and may cause loss of control.
g) Do not use a damaged accessory. Before each use
inspect the accessory such as abrasive wheels for
chips and cracks, backing pad for cracks, tear or
excess wear, wire brush for loose or cracked wires.
If power tool or accessory is dropped, inspect for
damage or install an undamaged accessory. After
inspecting and installing an accessory, position
yourself and bystanders away from the plane of
the rotating accessory and run the power tool at
maximum no-load speed for one minute.
Damaged accessories will normally break apart during
this test time.
h)
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments.
The eye protection must be capable of stopping fl ying
debris generated by various operations. The dust mask
or respirator must be capable of fi ltrating particles
generated by your operation. Prolonged exposure to
high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment.
Fragments of workpiece or of a broken accessory may
fl y away and cause injury beyond immediate area of
operation.
j) Hold the power tool by insulated gripping surfaces
only, when performing an operation where the
cutting accessory may contact hidden wiring or its
own cord.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
k) Position the cord clear of the spinning accessory.
If you lose control, the cord may be cut or snagged and your
hand or arm may be pulled into the spinning accessory.
l) Never lay the power tool down until the accessory
has come to a complete stop.
The spinning accessory may grab the surface and pull
the power tool out of your control.
m)
Do not run the power tool while carrying it at your side.
Accidental contact with the spinning accessory could
snag your clothing, pulling the accessory into your body.
n) Regularly clean the power tool’s air vents.
The motor’s fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause
electrical hazards.
o)
Do not operate the power tool near fl ammable materials.
Sparks could ignite these materials.
p) Do not use accessories that require liquid coolants.
Using water or other liquid coolants may result in
electrocution or shock.
KICKBACK AND RELATED
WARNINGS
Kickback is a sudden reaction to a pinched or snagged
rotating wheel, backing pad, brush or any other accessory.
Pinching or snagging causes rapid stalling of the rotating
accessory which in turn causes the uncontrolled power tool
to be forced in the direction opposite of the accessory’s
rotation at the point of the binding.
For example, if an abrasive wheel is snagged or pinched by
the workpiece, the edge of the wheel that is entering into the
pinch point can dig into the surface of the material causing
the wheel to climb out or kick out. The wheel may either jump
toward or away from the operator, depending on direction of
the wheel’s movement at the point of pinching.
Abrasive wheels may also break under these conditions.
Kickback is the result of power tool misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below.
a)
Maintain a fi rm grip on the power tool and position your
body and arm to allow you to resist kickback forces.
Always use auxiliary handle, if provided, for maximum
control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback
forces, if proper precautions are taken.
b) Never place your hand near the rotating accessory.
Accessory may kickback over your hand.
c) Do not position your body in the area where power
tool will move if kickback occurs.
Kickback will propel the tool in direction opposite to the
wheel’s movement at the point of snagging.
d) Use special care when working corners, sharp edges
etc. Avoid bouncing and snagging the accessory.
Corners, sharp edges or bouncing have a tendency to
snag the rotating accessory and cause loss of control or
kickback.
e) Do not attach a saw chain woodcarving blade or
toothed saw blade.
Such blades create frequent kickback and loss of control.
SAFETY WARNINGS SPECIFIC FOR
GRINDING AND ABRASIVE CUTTING-
OFF OPERATIONS
a) Use only wheel types that are recommended for
your power tool and the specifi c guard designed
for the selected wheel.
Wheels for which the power tool was not designed
cannot be adequately guarded and are unsafe.
0000BookG12VA.indb30000BookG12VA.indb3 2017/11/2912:09:132017/11/2912:09:13
Содержание
- G 12va g 13va g 15va g 13yf g 15yf 1
- English 2
- General power tool safety warnings 2
- English 3
- Kickback and related warnings 3
- Safety warnings common for grinding or abrasive cutting off operations 3
- Safety warnings specific for grinding and abrasive cutting off operations 3
- Additional safety warnings 4
- Additional safety warnings specific for abrasive cutting off operations 4
- English 4
- General safety instructions for grinders 4
- Safety warnings specific for sanding operations 4
- Applications 5
- English 5
- Specifications 5
- Standard accessories 5
- Symbols 5
- English 6
- Maintenance and inspection 6
- Mounting and operation 6
- English 7
- Allgemeine sicherheitshinweise für elektrogeräte 8
- Deutsch 8
- Deutsch 9
- Für schleif und trennschleifarbeiten geltende sicherheitshinweise 9
- Besondere sicherheitshinweise für schleif bzw trennschleifarbeiten 10
- Deutsch 10
- Rückschlag und dazu gehörige sicherheitshinweise 10
- Weitere sicherheitshinweise zu trennschleifarbeiten 10
- Allgemeine sicherheitshinweise für schleifgeräte 11
- Deutsch 11
- Sicherheitshinweise für schleifarbeiten 11
- Zusätzliche sicherheitswarnungen 11
- Anwendungsgebiete 12
- Deutsch 12
- Montage und betrieb 12
- Standardzubehör 12
- Symbole 12
- Technische daten 12
- Deutsch 13
- Wartung und inspektion 13
- Deutsch 14
- Avertissements de sécurité généraux pour l outil 15
- Français 15
- Avertissements de sécurité courants pour les opérations de meulage ou de découpage par abrasion 16
- Français 16
- Recul et avertissements connexes 16
- Avertissements de sécurité propres aux opérations de découpage par abrasion 17
- Avertissements de sécurité propres aux opérations de meulage et de découpage par abrasion 17
- Avertissements de sécurité spécifiques aux opérations de ponçage 17
- Consignes de sécurité générales pour les meuleuses 17
- Français 17
- Avertissements de sécurité supplémentaires 18
- Français 18
- Symboles 18
- Accessoires standard 19
- Applications 19
- Caractéristiques 19
- Entretien et vérification 19
- Français 19
- Installation et fonctionnement 19
- Français 20
- Avvertimenti generali di sicurezza sugli utensili elettrici 21
- Italiano 21
- Avvertimenti di sicurezza comuni per le operazioni di smerigliatura o di taglio abrasivo 22
- E il diametro esterno e lo spessore del vostro accessorio devono rientrare entro la capacità nominale dell utensile elettrico 22
- Italiano 22
- Avvertimenti di sicurezza aggiuntivi specifici per le operazioni di taglio abrasivo 23
- Avvertimenti di sicurezza specifici per le operazioni di smerigliatura e di taglio abrasivo 23
- Italiano 23
- Rinculo e relative avvertenze 23
- Avvertimenti di sicurezza specifici per le operazioni di levigatura 24
- Istruzioni di sicurezza generali per smerigliatrici 24
- Italiano 24
- Precauzioni di sicurezza aggiuntive 24
- Simboli 24
- Accessori standard 25
- Applicazioni 25
- Caratteristiche 25
- Italiano 25
- Montaggio e operazione 25
- Italiano 26
- Manutenzione ed ispezione 26
- Algemene veiligheidswaarschuwingen voor elektrisch gereedschap 27
- Nederlands 27
- Nederlands 28
- Veiligheidswaarschuwingen voor slijpen en doorslijpen 28
- Aanvullende specifieke veiligheidswaarschuwingen voor doorslijpen 29
- Nederlands 29
- Specifieke veiligheidswaarschuwingen voor slijpen en doorslijpen 29
- Terugslag en daarmee verband houdende waarschuwingen 29
- Aanvullende veiligheidswaarschuwingen 30
- Algemene veiligheidsinstructies voor slijpmachines 30
- Nederlands 30
- Veiligheidsinstructies specifiek voor schuurwerkzaamheden 30
- Montage en gebruik 31
- Nederlands 31
- Standaard toebehoren 31
- Symbolen 31
- Technische gegevens 31
- Toepassingen 31
- Nederlands 32
- Onderhoud en inspectie 32
- Nederlands 33
- Advertencias de seguridad general de la herramienta eléctrica 34
- Español 34
- Advertencias comunes de seguridad para las operaciones de molido o corte abrasivo 35
- Español 35
- Advertencias de seguridad adicionales específicas para las operaciones de corte abrasivo 36
- Advertencias de seguridad específicas para las operaciones de molido y corte abrasivo 36
- Español 36
- Retroceso y advertencias relacionadas 36
- Advertencias de seguridad adicionales 37
- Advertencias de seguridad específicas para las operaciones de lijado 37
- Español 37
- Instrucciones de seguridad generales para amoladoras 37
- Símbolos 37
- Accessorios estándar 38
- Aplicación 38
- Español 38
- Especificaciones 38
- Montaje y funcionamiento 38
- Español 39
- Mantenimiento e inspección 39
- Avisos gerais de segurança para a ferramenta elétrica 40
- Português 40
- Avisos de segurança comuns para operações de retificação ou corte abrasivo 41
- Português 41
- Recuo e avisos relacionados 41
- Avisos de segurança adicionais específicos para operações de corte abrasivo 42
- Avisos de segurança específicos para operações de lixa 42
- Avisos de segurança específicos para operações de retificação ou corte abrasivo 42
- Instruções de segurança gerais para rebarbadoras 42
- Português 42
- Avisos de segurança adicionais 43
- Português 43
- Símbolos 43
- Acessórios padrão 44
- Aplicações 44
- Especificações 44
- Manutenção e inspeção 44
- Montagem e utilização 44
- Português 44
- Português 45
- Allmänna säkerhetsvarningar för elektriska verktyg 46
- Svenska 46
- Kast och tillhörande varningar 47
- Svenska 47
- Säkerhetsvarningar vanliga för slipnings eller slipande kapningsarbeten 47
- Allmänna säkerhetsinstruktioner för vinkelslipar 48
- Speciella säkerhetsföreskrifter för sandslipningsarbeten 48
- Svenska 48
- Säkerhetsvarningar speciella för slipnings och slipande kapningsarbeten 48
- Ytterligare säkerhetsvarningar 48
- Ytterligare säkerhetsvarningar för slipande kapningsarbeten 48
- Användningsområden 49
- Standardtillbehör 49
- Svenska 49
- Symboler 49
- Tekniska data 49
- Montering och användning 50
- Svenska 50
- Underhåll och inspektion 50
- Svenska 51
- Generelle sikkerhedsadvarsler for elektrisk værktøj 52
- Generelle sikkerhedsadvarsler for slibning eller slibende afskæringsfunktioner 53
- Tilbageslag og relaterede advarsler 53
- Ekstra sikkerhedsforskrifter for slibende afskæringsfunktioner 54
- Generelle sikkerhedsforskrifter for vinkelslibere 54
- Særlige sikkerhedsadvarsler for sandslibning 54
- Særlige sikkerhedsforskrifter for slibning og slibende afskæringsfunktioner 54
- Ekstra sikkerhedsadvarsler 55
- Standardtilbehør 55
- Symboler 55
- Anvendelse 56
- Montering og anvendelse 56
- Specifikationer 56
- Vedligeholdelse og eftersyn 56
- Generelle sikkerhetsforholdsregler for elektroverktøy 58
- Sikkerhetsinstrukser for vanlig sliping og kutt operasjoner 59
- Tilbakeslag og relaterte advarsler 59
- Ekstra sikkerhetsinstrukser spesifikt for kutt operasjoner 60
- Flere sikkerhetsadvarsler 60
- Generelle sikkerhetsinstruksjoner for slipemaskiner 60
- Sikkerhetsadvarsler spesielt for slipe operasjoner 60
- Sikkerhetsinstrukser spesifikt for sliping og kutt operasjoner 60
- Anvendelse 61
- Spesifikasjoner 61
- Standard tilbehør 61
- Symboler 61
- Montering og bruk 62
- Vedlikehold og inspeksjon 62
- Yleiset sähkötyökalun turvallisuutta koskevat varoitukset 64
- Takapotku ja siihen liittyvät varoitukset 65
- Turvallisuutta koskevia varoituksia hiontaa ja katkaisuhiontaa varten 65
- Erityiset turvallisuusvaroitukset hiekkapaperihiontatoimintoja varten 66
- Lisää turvallisuutta koskevia varoituksia katkaisuhiontaa varten 66
- Turvallisuutta koskevia varoituksia erityisesti hiontaa ja katkaisuhiontaa varten 66
- Yleisiä hiomakoneen käyttöä koskevia turvaohjeita 66
- Lisää turvallisuutta koskevia varoituksia 67
- Perusvarusteet 67
- Sovellukset 67
- Symbolit 67
- Huolto ja tarkastus 68
- Kiinnittäminen ja käyttö 68
- Tekniset tiedot 68
- Γενικεσ προειδοποιησεισ ασφαλειασ του ηλεκτρικου εργαλειου 70
- Ελληνικά 70
- Ελληνικά 71
- Κοινεσ προειδοποιησεισ ασφαλειασ για λειανση η εργασιεσ κοπησ 71
- Ειδικεσ προειδοποιησεισ ασφαλειασ για εργασιεσ λειανσησ η κοπησ 72
- Ελληνικά 72
- Οπισθια κινηση και σχετικεσ προειδοποιησεισ 72
- Προσθετεσ ειδικεσ προειδοποιησεισ ασφαλειασ για εργασίεσ λειανσησ η κοπησ 72
- Γενικεσ οδηγιεσ ασφαλειασ για τροχουσ 73
- Ελληνικά 73
- Προειδοποιησεισ ασφαλειασ ειδικα για το χειρισμο δισκου αμμοβολησ 73
- Προσθετεσ προειδοποιησεισ ασφαλειασ 73
- Βασικα εξαρτηματα 74
- Ελληνικά 74
- Εφαρμογεσ 74
- Συμβολα 74
- Ελληνικά 75
- Στερεωση και λειτουργια 75
- Συντηρηση και ελεγχοσ 75
- Τεχνικα χαρακτηριστικα 75
- Ελληνικά 76
- Ogólne wskazówki bezpieczeństwa dotyczące elektronarzędzi 77
- Polski 77
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 78
- Polski 78
- Dodatkowe wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 79
- Odbicie i powiązane z nim ostrzeżenia 79
- Ogólne wskazówki bezpieczeństwa dotyczące cięcia 79
- Polski 79
- Dodatkowe wskazówki bezpieczeństwa 80
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania 80
- Polski 80
- Wskazówki bezpieczeństwa związane z wygładzaniem 80
- Akcesoria standardowe 81
- Montaż i praca 81
- Polski 81
- Specyfikacje techniczne 81
- Symbole 81
- Zastosowania 81
- Konserwacja i kontrola 82
- Polski 82
- Polski 83
- A szerszámgéppel kapcsolatos általános biztonsági figyelmeztetések 84
- Magyar 84
- Biztonsági figyelmeztetések csiszoló és vágó műveletekhez 85
- Magyar 85
- Visszarúgás és erre vonatkozó figyelmeztetések 85
- A csiszolási és darabolási műveletekre vonatkozó biztonsági figyelmeztetések 86
- A daraboló műveletekre vonatkozó kiegészítő biztonsági figyelmeztetések 86
- Biztonsági előírások a homokcsiszolási műveletekre vonatkozóan 86
- Csiszolókra vonatkozó általános biztonsági utasítások 86
- Magyar 86
- Magyar 87
- Szimbólumok 87
- További biztonsági figyelmeztetések 87
- Alkalmazási területek 88
- Karbantartás és ellenőrzés 88
- Magyar 88
- Műszaki adatok 88
- Szabványos kiegészítők 88
- Összeszerelés és használat 88
- Magyar 89
- Obecná bezpečnostní varování týkající se bezpečnosti elektrického nánářadí 90
- Čeština 90
- Bezpečnostní varování společné pro broušení a abrazivní řezání 91
- Upozornění na zpětný ráz 91
- Čeština 91
- Bezpečnostní varování pro broušení a řezání 92
- Bezpečnostní varování specifická pro broušení 92
- Doplňující bezpečnostní varování pro řezání 92
- Všeobecné bezpečnostní pokyny pro brusky 92
- Čeština 92
- Další bezpečnostní varování 93
- Standardní příslušenství 93
- Symboly 93
- Čeština 93
- Montáž a provoz 94
- Použití 94
- Specifikace 94
- Údržba a kontrola 94
- Čeština 94
- Čeština 95
- Genel elektri kli alet güvenli k uyarilari 96
- Türkçe 96
- Geri tepme ve i lgi li uyarilar 97
- Taşlama veya aşindirarak kesme i şlemleri i çi n genel güvenli k uyarilari 97
- Türkçe 97
- Aşindirarak kesme i şlemleri i çi n özel i lave güvenli k uyarilari 98
- Kalipçi taşlamalar i çi n genel güvenli k tali matlari 98
- Taşlama i şlemleri i çi n özel güvenli k uyarllari 98
- Taşlama ve aşindirarak kesme i şlemleri i çi n özel güvenli k uyarilari 98
- Türkçe 98
- I lave güvenli k uyarilari 99
- Semboller 99
- Standart aksesuarlar 99
- Türkçe 99
- Bakim ve muayene 100
- Montaj ve çaliştirma 100
- Tekni k özelli kler 100
- Türkçe 100
- Uygulamalar 100
- Türkçe 101
- Avertismente generale privind siguranţa sculelor electrice 102
- Română 102
- Avertismente de siguranţă generale pentru operaţiunile de șlefuire sau tăiere abrazivă 103
- Reculul și avertismentele aferente 103
- Română 103
- Avertismente de siguranţă specifice pentru operaţiunile de șlefuire și tăiere abrazivă 104
- Avertismente suplimentare de siguranţă specifice pentru operaţiunile tăiere abrazivă 104
- Avetismente de siguranţă specifice operaţiunilor de șlefuire 104
- Instrucţiuni generale de siguranţă pentru polizoare 104
- Română 104
- Accesorii standard 105
- Avertismente suplimentare privind siguranţa 105
- Română 105
- Simboluri 105
- Aplicaţii 106
- Asamblare și operare 106
- Română 106
- Specificaţii 106
- Întreţinere și verificare 106
- Română 107
- Slovenščina 108
- Splošna varnostna navodila za električna orodja 108
- Povratni udarec in ustrezna opozorila 109
- Slovenščina 109
- Varnostna opozorila značilna za brušenje ali rezanje 109
- Dodatna varnostna opozorila 110
- Dodatna varnostna opozorila za rezanje 110
- Slovenščina 110
- Splošna varnostna navodila za brusilnike 110
- Varnostna opozorila ki veljajo posebej za brušenje 110
- Varnostna opozorila za brušenje in rezanje 110
- Namestitev in delovanje 111
- Simboli 111
- Slovenščina 111
- Specifikacije 111
- Standardna pribor 111
- Uporaba 111
- Slovenščina 112
- Vzdrževanje in pregledovanje 112
- Slovenščina 113
- Slovenčina 114
- Všeobecné bezpečnostné výstrahy pre elektrické náradie 114
- Bezpečnostné výstrahy spoločné pre činnosti brúsenia a rozbrusovania 115
- Slovenčina 115
- Spätný náraz a príslušné varovania 115
- Bezpečnostné výstrahy charakteristické pre činnosti brúsenia 116
- Bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 116
- Dodatočné bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 116
- Slovenčina 116
- Všeobecné bezpečnostné pokyny pre brúsky 116
- Slovenčina 117
- Symboly 117
- Ďalšie bezpečnostné varovania 117
- Montáž a obsluha 118
- Použitie 118
- Slovenčina 118
- Technické parametre 118
- Údržba a kontrola 118
- Štandardné príslušenstvo 118
- Slovenčina 119
- Български 120
- Общи мерки за безопасност при използване на електрически инструменти 120
- Български 121
- Предупреждения за безопасност общи за операции включващи шлифоване или абразивно рязане 121
- Български 122
- Допълнителни предупреждения за безопасност специфични за операции включващи абразивно рязане 122
- Предупреждения за безопасност специфични за операции включващи шлифоване или абразивно рязане 122
- Предупреждения за откат и свързани с това опасности 122
- Български 123
- Допълнителни предупреждения за безопасност 123
- Общи инструкции за безопасност за шлайфмашини 123
- Предупреждения за безопасност специфични за операции по полиране 123
- Български 124
- Монтаж и експлоатация 124
- Приложения 124
- Символи 124
- Спецификации 124
- Стандартни аксесоари 124
- Български 125
- Поддръжка и инспекция 125
- Български 126
- Opšta bezbednosna upozorenja za električni alat 127
- Srpski 127
- Bezbednosna upozorenja za postupke brušenja ili abrazivnog sečenja 128
- Povratni udar i slična upozorenja 128
- Srpski 128
- Bezbednosna upozorenja specifična za operacije šmirglanja 129
- Bezbednosna upozorenja specifična za postupke brušenja i abrazivnog sečenja 129
- Dodatna bezbednosna upozorenja specifična za postupke abrazivnog sečenja 129
- Opšta bezbednosna uputstva za brusilice 129
- Srpski 129
- Dodatna bezbednosna upozorenja 130
- Oznake 130
- Srpski 130
- Montaža i upotreba 131
- Održavanje i provera 131
- Primene 131
- Specifikacije 131
- Srpski 131
- Standardni pribor 131
- Srpski 132
- Hrvatski 133
- Općenita sigurnosna upozorenja za električne alate 133
- Hrvatski 134
- Povratni udar i povezana upozorenja 134
- Sigurnosna upozorenja za sve operacije brušenja ili abrazivnog rezanja 134
- Dodatna sigurnosna upozorenja 135
- Dodatna sigurnosna upozorenja specifična za operacije abrazivnog rezanja 135
- Hrvatski 135
- Opće sigurnosne upute za brusilice 135
- Sigurnosna upozorenja specifična za brušenje 135
- Sigurnosna upozorenja specifična za operacije brušenja i abrazivnog rezanja 135
- Hrvatski 136
- Simboli 136
- Specifikacije 136
- Standardna oprema 136
- Vrste primjene 136
- Hrvatski 137
- Montaža i rad 137
- Održavanje i inspekcija 137
- Hrvatski 138
- Загальні інструкції безпеки електричного інструменту 139
- Українська 139
- Загальні попередження про обережність для проведення шліфувальних робіт або відрізання 140
- Українська 140
- Віддача і пов язані з нею небезпеки 141
- Додаткові заходи безпеки спеціально для абразивного різання 141
- Заходи безпеки під час шліфування і абразивного обрізування 141
- Українська 141
- Додаткові правила безпеки 142
- Загальні інструкції безпеки для шліфувальної машини 142
- Заходи безпеки спеціально для робіт зі шліфування 142
- Українська 142
- Області застосування 143
- Символи 143
- Стандартні аксесуари 143
- Технічні характеристики 143
- Українська 143
- Установка та експлуатація 143
- Технічне обслуговування і перевірка 144
- Українська 144
- Общие правила безопасности при работе с электроинструментом 145
- Русский 145
- Общие предупреждения об осторожности для проведения шлифовальных работ или отрезания 146
- Русский 146
- Особые меры предосторожности для режущих работ и абразивной отрезки 147
- Отдача и другие похожие предупреждения 147
- Русский 147
- Дополнительные особые меры предосторожности для абразивной отрезки 148
- Общие инструкции по технике безопасности для шлифовальных машин 148
- Особые меры предосторожности для шлифовальных операции 148
- Русский 148
- Дополнительные указания по обеспечению безопасности 149
- Русский 149
- Символы 149
- Назначение 150
- Русский 150
- Стандартные принадлежности 150
- Технические характеристики 150
- Техническое обслуживание и осмотр 150
- Установка и эксплуатация 150
- Русский 151
- Book_g12va indb 157 0000book_g12va indb 157 2017 11 29 12 09 46 2017 11 29 12 09 46 157
- Certificado de garantia 157
- Certificado de garantía 157
- Certificat de garantie 157
- Certificat de garanţie 157
- Certificato di garanzia 157
- Deutsch norsk slovenščina 157
- English dansk română 157
- Español magyar hrvatski 157
- Français suomi slovenčina 157
- Garancia bizonylat 157
- Garancijsko potrdilo 157
- Garanti serti fi kasi 157
- Garantibevis 157
- Garanticertifikat 157
- Garantiebewijs 157
- Garantieschein 157
- Garantisertifikat 157
- Garantni sertifikat 157
- Guarantee certificate 157
- Gwarancja 157
- Italiano ελληνικά български 157
- Jamstveni certifikat 157
- Nederlands polski srpski 157
- Português čeština український 157
- Svenska türkçe русский 157
- Takuutodistus 157
- Záruční list 157
- Záručný lista 157
- Πιστοποιητικο εγγυησησ 157
- Гарантийный сертификат 157
- Гарантійний сертифікат 157
- Гаранционен сертификат 157
- Hikoki power tools belgium n v s a 159
- Hikoki power tools czech s r o 159
- Hikoki power tools denmark a s 159
- Hikoki power tools deutschland gmbh 159
- Hikoki power tools finland oy 159
- Hikoki power tools france s a s 159
- Hikoki power tools hungary kft 159
- Hikoki power tools italia s p a 159
- Hikoki power tools lbérica s a 159
- Hikoki power tools netherlands b v 159
- Hikoki power tools norway as 159
- Hikoki power tools polska sp z o o 159
- Hikoki power tools romania s r l 159
- Hikoki power tools rus l l c 159
- Hikoki power tools sweden ab 159
- Hikoki power tools u k ltd 159
- Hikoki power tools österreich gmbh 159
- 2018 naoto yamashiro european standard manager 162
- A nakagawa corporate offi cer 162
- Deutsch español 162
- English nederlands 162
- Français português 162
- Head offi ce in japan 162
- Hikoki power tools deutschland gmbh 162
- Italiano svenska 162
- Koki holdings co ltd 162
- Representative offi ce in europe 162
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 162
- Siemensring 34 47877 willich germany 162
- 2018 naoto yamashiro european standard manager 163
- A nakagawa corporate offi cer 163
- Dansk polski 163
- Head offi ce in japan 163
- Hikoki power tools deutschland gmbh 163
- Koki holdings co ltd 163
- Norsk magyar 163
- Representative offi ce in europe 163
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 163
- Siemensring 34 47877 willich germany 163
- Suomi čeština 163
- Ελληνικά türkçe 163
- 2018 naoto yamashiro european standard manager 164
- A nakagawa corporate offi cer 164
- Code no c99701972 m printed in malaysia 164
- Head offi ce in japan 164
- Hikoki power tools deutschland gmbh 164
- Koki holdings co ltd 164
- Representative offi ce in europe 164
- Română srpski 164
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 164
- Siemensring 34 47877 willich germany 164
- Slovenčina український 164
- Slovenščina hrvatski 164
- Български русский 164
Похожие устройства
- Pierre Ricaud P97242.2123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5126Q Инструкция по эксплуатации
- Hikoki G 18ST Инструкция по эксплуатации
- Pierre Ricaud P97243.5122Q Инструкция по эксплуатации
- Hikoki G 23UC Инструкция по эксплуатации
- Hikoki G 23SWU Инструкция по эксплуатации
- Hikoki G 23SU Инструкция по эксплуатации
- Hikoki G 23ST Инструкция по эксплуатации
- Hikoki G 23SEY Инструкция по эксплуатации
- Hikoki G 23SCY Инструкция по эксплуатации
- Hikoki G 23MRUA Инструкция по эксплуатации
- Hikoki G 23MR Инструкция по эксплуатации
- Hikoki RH 650V Инструкция по эксплуатации
- Hikoki RH 600T Инструккция по эксплуатации
- Hikoki M 8V2 Инструкция по эксплуатации
- Hikoki M 8SA2 Инструкция по эксплуатации
- Hikoki M 12VE Инструкция по эксплуатации
- Hikoki M 12V2 Инструкция по эксплуатации
- Hikoki M 12SA2 Инструкция по эксплуатации